3CX VOIP client Build History / Change Log

Build version 5.1.4492 15 April 2008

Added: Voip Client logging functionality. Ini file entry LoggingLevel = 1(default) or 0 (none) or2 (detailed).
Added: User can specify port in the connection addresses, "ip:port" in case pbx is running on non standard port.
Fixed: Stun resolution process now tries to make STUN resolution before a call if STUN is not resolved on startup.
Fixed: If client fails to connect to PBX, an error message was added to notify user.
Fixed: Presence of lines showing incorrect status in Voip client.

Build version 5.0.4393 2 April 2008 (Release Candidate)

Note: This client has an improved presence module which requires server build 4393

Added: Improved presence module - Requires latest build!
Fixed: Trying to accept calls not in ringing state.
Fixed: Phone will not resolve stun before call if no stun is resolved on startup.
Fixed: Away status not shown properly in presence.
Fixed: Calls from Tapi including brackets and dashes are now converted properly and can be dialed.
KNOWN ISSUE: If an incorrect STUN server is specified, the Voip Client will crash. This will be fixed in the release build which is to be released next week.

Build version 5.0.4316 20 March 2008 (Release Candidate)

Added: Speed Dials
Added: Copy and paste of numbers
Added: Editing of numbers displayed in Voip Client dialing pane.
Added: Skin support and 4 new skins included.
Added: Blind transfer and attended transfer dialogs (accessible from Action drop down menu when a call is established).
Added: Option to suppress RTP audio sent from PBX before a call is established.
Added: Support for 64 bit installations
Fixed: Voip client will use only local IP when Tunnel and Stun both selected.
Fixed: Update of status for not showing "on hook" after a call is terminated.
Fixed: Queue logged in / logged out status was always marked as logged out even though client is logged in to a queue.
Fixed: FQDN can now be used in "remote end of tunnel" where before only IP was supported.
Fixed: Presence showing wrong information through 3CX tunnel.
Fixed: Resolution of FQDN used in voip client configuration are always resolved on startup.
Fixed: When phone status is set to away, after a call the status is set back to available.
Fixed: Client disconnects after a period of inactivity when connected through tunnel.
Fixed: Ability to switch sound devices on the fly without the need to restart the voip client.
Fixed: Unexpected drop of calls on re-subscribe.
Fixed: Away status not showing in presence list.
Fixed: GSM is first priority codec in Out of Office profile (ideal for slow connections)

Build version 5.0.4132 14 February 2008 (BETA 7)

Added: 3CX tunnel functionality (tunnel is to be used from phone itself and even for other phones to connect to pbx through the same client's tunnel).
Added: You can now switch sound devices on the fly without the need to restart the voip client.
Added: Option for having separate sound devices for ringing and for playback.
Fixed: Crash when client tries to re-login.
Fixed: use only local IP when Tunnel and Stun both selected.
Fixed: Update of status when not showing "on hook" after a call is terminated.
Fixed: Switching languages no longer requires a restart.
Fixed: Queue logged in / logged out status was always marked as logged out even though client is logged in to a queue.
Fixed: Several presence problems.
Fixed: resolution of FQDN used in voip client configuration are always resolved on startup.
Fixed: When phone status is set to away, after a call the status is set back to available.
KNOWN ISSUE: Behind a tunnel, it may happen that client crashes if you send a call to voice mail.

Build version 5.0.4034 1 February 2008 (BETA 6)

Added display of currently used profile
Improved profile adding/removing behavior
Added warning message when stun is not resolved. ("stun server error: port not resolved") and fixed unresolved stun freeze error.
Added "Action on ringing" options (Show answer dialogue, show notification pop-up, bring main window to front)
Added "Connection selection/Profile selection" option in menu bar.
Fixed "answer notification popup" CID issue. (we were reporting our own CID instead of callers)

Build version 5.0.3974 29 January 2008 (BETA 5)

Added ability to select audio device to be used for ringing or answering of calls.
Added ability to configure DTMF to allow DTMF tones to be generated whilst on a call.
Added ability to activate Call recording on 3CX Phone System Server
Added Re-dial capability in history dialog
Add ability to create, rename and edit Connection profiles
Added abililty to choose priority of speech codecs
Improved volume slide control
Added Ability to select language of interface
Fixed issue with GUI on custom screen sizes
Added ability to transfer a call to Voice Mail

Build version 5.0.3763 20 December 2007 (BETA 4)

3CX VOIP client can now be used as an external extension

Build version 5.0.3724 17 December 2007 (BETA 3)

Possibility to additional connections (beyond in/out of the office)
Ability to use UserID, AuthentacationID & Password to register against any SIP server
Improved Presence reporting
Minor interface glitches were fixed.
Improved VOIP Client installation and removed VPN.
Desk phone mode improvements

Build version 5.0.3697 13 December 2007 (BETA 2)

Re-designed connection dialog
Ability to authentication using Authentication User ID and Password, allowing for 3CX VOIP client to be used against other SIP servers and VOIP providers
Tested against 3CX Phone System V5
Tested against popular SIP phones including Grandstream, SNOM and Polycom
Several bug fixes

Build version 5.0.3598 5 December 2007 (BETA 1)

This is the first publicly available version of 3CX VOIP Client. 3CX VOIP client is a complete SIP client and future versions can in fact be used with other SIP servers. Main features

Can function as software SIP phone or in combination with a desk phone as a presence monitor
Uses Voice mail pin and extension number for authentication