Comments on: 3CX Phone System Version 9 beta 1 is here! http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/ Information about VOIP, SIP, 3CX Phone System Thu, 09 Feb 2012 12:54:37 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: jimswel http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5077 jimswel Thu, 10 Jun 2010 12:06:13 +0000 http://www.3cx.com/blog/?p=5862#comment-5077 merci atous merci atous

]]> By: Daniel vadberg http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5073 Daniel vadberg Tue, 08 Jun 2010 19:38:21 +0000 http://www.3cx.com/blog/?p=5862#comment-5073 Great work! Looking for a faster way to use a disa function. But perhaps in ver 10? Great work! Looking for a faster way to use a disa function. But perhaps in ver 10?

]]> By: Nick Galea http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5071 Nick Galea Tue, 08 Jun 2010 05:08:57 +0000 http://www.3cx.com/blog/?p=5862#comment-5071 Hi Fei Yu - good point - yes something that we will look into ! Hi Fei Yu – good point – yes something that we will look into !

]]> By: Nick Galea http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5070 Nick Galea Tue, 08 Jun 2010 05:07:48 +0000 http://www.3cx.com/blog/?p=5862#comment-5070 Yes, but you could do that already on v8 :) Yes, but you could do that already on v8 :)

]]> By: Fei Yu http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5069 Fei Yu Tue, 08 Jun 2010 04:35:27 +0000 http://www.3cx.com/blog/?p=5862#comment-5069 @Stefan Yea we have already implemented the LDAP lookup on CISCO phones.. That's why the more we need that on the Soft phone clients :) We can say good bye to all the issues we have with TAPI.. With ldap lookup on the soft phone client...we can just lookup a contact and add it to a local phone book if possible and just call directly... @Stefan

Yea we have already implemented the LDAP lookup on CISCO phones..
That’s why the more we need that on the Soft phone clients :)

We can say good bye to all the issues we have with TAPI..
With ldap lookup on the soft phone client…we can just lookup a contact and add it to a local phone book if possible and just call directly…

]]> By: Corey http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5068 Corey Mon, 07 Jun 2010 21:34:06 +0000 http://www.3cx.com/blog/?p=5862#comment-5068 Can we tell 3CXv9 to delete v-mails after sending them to e-mail? Can we tell 3CXv9 to delete v-mails after sending them to e-mail?

]]> By: <fb:name linked="false" useyou="false" uid="1435406578">Stefan Walther</fb:name> http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5066 Stefan Walther Mon, 07 Jun 2010 12:13:36 +0000 http://www.3cx.com/blog/?p=5862#comment-5066 @feiyu Have a look here for AD Lookup: http://www.3cx.com/blog/voip-howto/active-directory-cisco-phone/ This is just an example there is snom guide as well in the blog. @feiyu
Have a look here for AD Lookup:
http://www.3cx.com/blog/voip-howto/active-directory-cisco-phone/

This is just an example there is snom guide as well in the blog.

]]> By: Nicky http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5063 Nicky Mon, 07 Jun 2010 06:27:00 +0000 http://www.3cx.com/blog/?p=5862#comment-5063 @John-on each extension, in the provisioning tab you can provision your extension to have keys for Parking Orbit. The shared parking places are last in the list of extensions. We register 10 parking places by default named SP0-9. When you select these special park extensions, the provisioning templates have the keys adjusted and configured for parking Ex- Snom will become park=orbit, yealink becomes Key event call park, Cisco fnc=sd+blf;sub=SP0@10.172.0.15;nme=SP9 so on so forth. When a call comes in, you can press transfer followed by the park key being monitored on the phone. Call will be transfered to the parking orbit. Other users in your department monitoring this shared parking place, they will see this lamp blinking indicating that there is a call on hold. Anyone can press the lamp and take the call. The key will stop blinking showing that there are no calls waiting in the place. @John-on each extension, in the provisioning tab you can provision your extension to have keys for Parking Orbit. The shared parking places are last in the list of extensions. We register 10 parking places by default named SP0-9. When you select these special park extensions, the provisioning templates have the keys adjusted and configured for parking Ex- Snom will become park=orbit, yealink becomes Key event call park, Cisco fnc=sd+blf;sub=SP0@10.172.0.15;nme=SP9 so on so forth. When a call comes in, you can press transfer followed by the park key being monitored on the phone. Call will be transfered to the parking orbit. Other users in your department monitoring this shared parking place, they will see this lamp blinking indicating that there is a call on hold. Anyone can press the lamp and take the call. The key will stop blinking showing that there are no calls waiting in the place.

]]> By: Nick Galea http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5062 Nick Galea Mon, 07 Jun 2010 05:50:16 +0000 http://www.3cx.com/blog/?p=5862#comment-5062 @John - you just assign a parking field to a BLF on a phone - ensure each BLF on each phone gets the same parking field and then you are done... @John – you just assign a parking field to a BLF on a phone – ensure each BLF on each phone gets the same parking field and then you are done…

]]> By: Graham Hill http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5060 Graham Hill Sun, 06 Jun 2010 10:07:13 +0000 http://www.3cx.com/blog/?p=5862#comment-5060 Hi Nick Great development path for 3CX right thru from version 7 (where I started to use it). Well done & thanks ... I have some users who are nostalgic for the call pick-up groups they used to have with their old PBX. Is there any way we can get this feature into version 9??? i.e. rather than the *20* pick-up code being global, it could be zoned using a "pick-up group number", or even applied as a feature of the existing extension groups. This prevents a problem in large systems, where users hear their college's phone ringing, use a speed-dial [*20*] to pick the call, but get connected to an older call that was ringing in a different department. Thanks ... Hi Nick
Great development path for 3CX right thru from version 7 (where I started to use it). Well done & thanks …
I have some users who are nostalgic for the call pick-up groups they used to have with their old PBX. Is there any way we can get this feature into version 9??? i.e. rather than the *20* pick-up code being global, it could be zoned using a “pick-up group number”, or even applied as a feature of the existing extension groups.
This prevents a problem in large systems, where users hear their college’s phone ringing, use a speed-dial [*20*] to pick the call, but get connected to an older call that was ringing in a different department. Thanks …

]]> By: John Rayfield, Jr. http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5057 John Rayfield, Jr. Sat, 05 Jun 2010 03:59:16 +0000 http://www.3cx.com/blog/?p=5862#comment-5057 I've looked in the documentation for more information on how the "SLA like parking functionality" works, but I can't find anything that gives any more details. Am I 'blind', or is it not there? I’ve looked in the documentation for more information on how the “SLA like parking functionality” works, but I can’t find anything that gives any more details. Am I ‘blind’, or is it not there?

]]> By: <fb:name linked="false" useyou="false" uid="647996868">Nick Galea</fb:name> http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5055 Nick Galea Fri, 04 Jun 2010 04:11:58 +0000 http://www.3cx.com/blog/?p=5862#comment-5055 @Rudym - with an outbound rule you can assign more then one extension to it. So for example if you want to PIN lock say 10 phones stationed in public places, you can have one rule covering them all. The other phones you do not need to PIN lock i would think, as you will drive the users absolutely stark raving mad if they have to enter a PIN for each call.... @Rudym – with an outbound rule you can assign more then one extension to it. So for example if you want to PIN lock say 10 phones stationed in public places, you can have one rule covering them all.

The other phones you do not need to PIN lock i would think, as you will drive the users absolutely stark raving mad if they have to enter a PIN for each call….

]]> By: Rudym http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5052 Rudym Thu, 03 Jun 2010 18:01:34 +0000 http://www.3cx.com/blog/?p=5862#comment-5052 Hi Brendan; You are right, that is one way of doing it and there is a post on the forum, but when you have a large number of users the process becomes cumbersome. Besides the feature I and others are requesting (see forum) is not uncommon with any PBX especially traditional PBX systems. Hi Brendan;

You are right, that is one way of doing it and there is a post on the forum, but when you have a large number of users the process becomes cumbersome. Besides the feature I and others are requesting (see forum) is not uncommon with any PBX especially traditional PBX systems.

]]> By: Nick Galea http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5049 Nick Galea Thu, 03 Jun 2010 06:02:50 +0000 http://www.3cx.com/blog/?p=5862#comment-5049 Hi Brendan - thanks for the tip! Yes you are right, for those extensions that need to be pin protected you could assign them an outbound rule with a PIN like outbound dial rule and you would achieve the same thing. @feiyu - i think you need to post that on the feature request forum for version 10 Hi Brendan – thanks for the tip! Yes you are right, for those extensions that need to be pin protected you could assign them an outbound rule with a PIN like outbound dial rule and you would achieve the same thing.
@feiyu – i think you need to post that on the feature request forum for version 10

]]> By: Discovery http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5048 Discovery Thu, 03 Jun 2010 05:51:12 +0000 http://www.3cx.com/blog/?p=5862#comment-5048 Hi Rudym, The good news for you is that the pin code feature is already there - all you need to do is define a prefix in your outbound call rules as the pin before allowing users to dial long distance or overseas. Cheers, Brendan Hi Rudym,

The good news for you is that the pin code feature is already there – all you need to do is define a prefix in your outbound call rules as the pin before allowing users to dial long distance or overseas.

Cheers, Brendan

]]> By: feiyu http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5047 feiyu Thu, 03 Jun 2010 00:49:35 +0000 http://www.3cx.com/blog/?p=5862#comment-5047 Wat about the following any roadmap? 1) File Transfer via 3CX Assistant 2) Desktop Sharing via 3CX Assistant 3) Video Conference upto 6 parties 4) User pressence in-synced across multi 3cx servers? 5) LDAP Address Book Lookups 6) A seperate option Make an outbound call via Digital Receptionist (That will not break after Re-Direct TO Exchange is enabled) Wat about the following any roadmap?
1) File Transfer via 3CX Assistant
2) Desktop Sharing via 3CX Assistant
3) Video Conference upto 6 parties
4) User pressence in-synced across multi 3cx servers?
5) LDAP Address Book Lookups
6) A seperate option Make an outbound call via Digital Receptionist
(That will not break after Re-Direct TO Exchange is enabled)

]]> By: Nick Galea http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5046 Nick Galea Wed, 02 Jun 2010 16:14:33 +0000 http://www.3cx.com/blog/?p=5862#comment-5046 Hi Bruce - Thanks for the heads up! We dont have a final release date yet. @DanH, RudyM - we dont have forced PIN code or Billing code, but thanks for the feedback. Hi Bruce – Thanks for the heads up! We dont have a final release date yet.
@DanH, RudyM – we dont have forced PIN code or Billing code, but thanks for the feedback.

]]> By: Rudym http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5044 Rudym Wed, 02 Jun 2010 15:21:03 +0000 http://www.3cx.com/blog/?p=5862#comment-5044 It's a shame the PIN code feature did not make it this version and for what I see there is no plan for such a valuable feature. It’s a shame the PIN code feature did not make it this version and for what I see there is no plan for such a valuable feature.

]]> By: Bruce Kreeger http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5041 Bruce Kreeger Wed, 02 Jun 2010 03:59:36 +0000 http://www.3cx.com/blog/?p=5862#comment-5041 3CX Team - great job! I just deployed one Ver. 9 Beta to a master bridged system and of course to the slave bridged system. So far the new features all work well. I particularly like that I can see both sides on 3CX Assistant. We will be using this in a working environment, our own phone system. We have a mixed system with Cisco, Linksys, Yealink, and Aastra phones in the mix. Several Patton 4114 FXS ports in use as well for POTS and several VoIP providers including our own. What is the time frame for final release? Thanks again. Bruce G. Kreeger bkreeger@clarityscg.com 3CX Team – great job! I just deployed one Ver. 9 Beta to a master bridged system and of course to the slave bridged system. So far the new features all work well. I particularly like that I can see both sides on 3CX Assistant. We will be using this in a working environment, our own phone system. We have a mixed system with Cisco, Linksys, Yealink, and Aastra phones in the mix. Several Patton 4114 FXS ports in use as well for POTS and several VoIP providers including our own. What is the time frame for final release? Thanks again.

Bruce G. Kreeger
bkreeger@clarityscg.com

]]> By: DanH http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5038 DanH Wed, 02 Jun 2010 00:54:23 +0000 http://www.3cx.com/blog/?p=5862#comment-5038 Not adding in the forced billing code in this release (As Rudym asked for above)is nuts. It's the only mainstream feature missing holding the whole system back from wide enterprise competition. Almost every single service-based business uses forced billing codes. Not adding in the forced billing code in this release (As Rudym asked for above)is nuts. It’s the only mainstream feature missing holding the whole system back from wide enterprise competition. Almost every single service-based business uses forced billing codes.

]]> By: Tim http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5036 Tim Tue, 01 Jun 2010 14:38:33 +0000 http://www.3cx.com/blog/?p=5862#comment-5036 I have version 8 with 24 call paths. If I install Beta for 9 will it go back to the 2 call path demo limit?? I have version 8 with 24 call paths. If I install Beta for 9 will it go back to the 2 call path demo limit??

]]> By: Andrew http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5035 Andrew Tue, 01 Jun 2010 08:53:49 +0000 http://www.3cx.com/blog/?p=5862#comment-5035 Fantastic news! Are the known issues resolved or are these set to be fixed before the final release? Fantastic news!

Are the known issues resolved or are these set to be fixed before the final release?

]]> By: Nick Galea http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5034 Nick Galea Tue, 01 Jun 2010 04:23:38 +0000 http://www.3cx.com/blog/?p=5862#comment-5034 @ Bruno @ John - Thanks for the headsup! @ Jonathan - Right now you need to use the 3CX Assistant to pick up a call from a specific queue @ source - you can use the tunnel @max - you can also set your status from the voice mail menu... @ Bruno @ John – Thanks for the headsup!
@ Jonathan – Right now you need to use the 3CX Assistant to pick up a call from a specific queue
@ source – you can use the tunnel
@max – you can also set your status from the voice mail menu…

]]> By: John Fletcher http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5033 John Fletcher Tue, 01 Jun 2010 03:44:30 +0000 http://www.3cx.com/blog/?p=5862#comment-5033 Wow, just read through the features and changes, I can't wait to try this out. I'm downloading it now and will be up late trying this beta out. You just keep making it better! John Wow, just read through the features and changes, I can’t wait to try this out. I’m downloading it now and will be up late trying this beta out.

You just keep making it better!

John

]]> By: Jonathan Flietstra http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5029 Jonathan Flietstra Mon, 31 May 2010 18:59:30 +0000 http://www.3cx.com/blog/?p=5862#comment-5029 Hi.. Sound great V9.. Users ask for. - User rights for admin console so that user can change queue/ringgroups etc.. - Pickup a call from a specific queue with *20*queuenumber Hi..

Sound great V9..

Users ask for.
- User rights for admin console so that user can change queue/ringgroups etc..
- Pickup a call from a specific queue with *20*queuenumber

]]> By: source http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5027 source Mon, 31 May 2010 16:13:31 +0000 http://www.3cx.com/blog/?p=5862#comment-5027 do you have an IAX solution or better do you have a solution for me because i moved in tunisia and the sip is blocqued here do you have an IAX solution or better do you have a solution for me because i moved in tunisia and the sip is blocqued here

]]> By: Max Power http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5026 Max Power Mon, 31 May 2010 15:35:05 +0000 http://www.3cx.com/blog/?p=5862#comment-5026 Great work guys, looks awesome! Only thing that would be really nice is a way to dial into away using a * code or something. Right now, *60 and *61 put the phone into DND and it would be nice if that would use the away options in the ext instead of the phone not registered. Great work guys, looks awesome!
Only thing that would be really nice is a way to dial into away using a * code or something. Right now, *60 and *61 put the phone into DND and it would be nice if that would use the away options in the ext instead of the phone not registered.

]]> By: Bruno Bracquiné http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5024 Bruno Bracquiné Mon, 31 May 2010 13:58:46 +0000 http://www.3cx.com/blog/?p=5862#comment-5024 Edit previous post: the answer is in the forums (post "call diversion" under 3cx phone system v.9). It works as promised; I finally get to see who's calling when forwarding to my mobile. Brilliant! Edit previous post: the answer is in the forums (post “call diversion” under 3cx phone system v.9). It works as promised; I finally get to see who’s calling when forwarding to my mobile. Brilliant!

]]> By: Bruno Bracquiné http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5022 Bruno Bracquiné Mon, 31 May 2010 12:16:43 +0000 http://www.3cx.com/blog/?p=5862#comment-5022 You guys are really going somewhere with this product - time conditions are becoming at least as good as freepbx (and I really like thosse!). Keep it up! One question though; "Then on the extension you have an option – Enable 302 diversion header" : this has me baffled. Could you elaborate? If I could get this to work, I would be a very happy camper... Best regards, Bruno. You guys are really going somewhere with this product – time conditions are becoming at least as good as freepbx (and I really like thosse!). Keep it up! One question though; “Then on the extension you have an option – Enable 302 diversion header” : this has me baffled. Could you elaborate? If I could get this to work, I would be a very happy camper…

Best regards,

Bruno.

]]> By: Nick Galea http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5015 Nick Galea Mon, 31 May 2010 04:54:18 +0000 http://www.3cx.com/blog/?p=5862#comment-5015 @greg, carlton - thanks for the heads up! @ rudym - we are not planning such a feature, sorry @ timothy - you can also a sip phone on your mobile and register 'sip forked' to your extension. You can have the assistant place you out of office based on your working hours if you want... @greg, carlton – thanks for the heads up!
@ rudym – we are not planning such a feature, sorry
@ timothy – you can also a sip phone on your mobile and register ‘sip forked’ to your extension. You can have the assistant place you out of office based on your working hours if you want…

]]> By: Greg http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5007 Greg Sun, 30 May 2010 18:15:16 +0000 http://www.3cx.com/blog/?p=5862#comment-5007 Great! expected deployment of video support and now I can not wait to try it. thanks from Rome! Great!
expected deployment of video support and now I can not wait to try it.
thanks from Rome!

]]> By: Carlton http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5006 Carlton Sun, 30 May 2010 13:54:48 +0000 http://www.3cx.com/blog/?p=5862#comment-5006 Great to hear Dynamics CRM integration is coming! Our company is totally built around CRM and 3CX so we're very happy to hear the two are being married. Great to hear Dynamics CRM integration is coming! Our company is totally built around CRM and 3CX so we’re very happy to hear the two are being married.

]]> By: Rudym http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5004 Rudym Sun, 30 May 2010 05:51:35 +0000 http://www.3cx.com/blog/?p=5862#comment-5004 Hi, Will the ability to require a PIN code to place outgoing or long distance calls make it to this version. Hi,

Will the ability to require a PIN code to place outgoing or long distance calls make it to this version.

]]> By: <fb:name linked="false" useyou="false" uid="10502661">Timothy Ericson</fb:name> http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5003 Timothy Ericson Sun, 30 May 2010 03:26:06 +0000 http://www.3cx.com/blog/?p=5862#comment-5003 Looks great! It would be great if it could do the following 2 important things: Have the ability to ring the cell phone and the sip extension at the same time. AND The 3cx assistant should have the option to automatically place the extension in out of office if the assistant is not running, then have it change to available when its running. Hope this can be included before the final release. Looks great! It would be great if it could do the following 2 important things:

Have the ability to ring the cell phone and the sip extension at the same time.

AND

The 3cx assistant should have the option to automatically place the extension in out of office if the assistant is not running, then have it change to available when its running.

Hope this can be included before the final release.

]]> By: Nick Galea http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5001 Nick Galea Sat, 29 May 2010 16:08:48 +0000 http://www.3cx.com/blog/?p=5862#comment-5001 @Abdulah Thanks for the feedback. Those features are not in v9. However, Fax sending can be done using 3rd party fax send tools such as faxvoip. If you want full access to call logs and do more filtering you can also export to excel.... @Abdulah Thanks for the feedback. Those features are not in v9. However, Fax sending can be done using 3rd party fax send tools such as faxvoip. If you want full access to call logs and do more filtering you can also export to excel….

]]> By: Nick Galea http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-5000 Nick Galea Sat, 29 May 2010 16:06:20 +0000 http://www.3cx.com/blog/?p=5862#comment-5000 Thanks Thomas! Yes you can use this one: NG6N-XP6A-86SP-4IGW. Thanks Thomas! Yes you can use this one: NG6N-XP6A-86SP-4IGW.

]]> By: Thomas Vliegen http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-4999 Thomas Vliegen Sat, 29 May 2010 13:00:08 +0000 http://www.3cx.com/blog/?p=5862#comment-4999 Nice job. I'm started with the testing proces directly. Is there an demo key availible to use all options. Nice job.

I’m started with the testing proces directly. Is there an demo key availible to use all options.

]]> By: Nicky http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-4998 Nicky Sat, 29 May 2010 11:12:05 +0000 http://www.3cx.com/blog/?p=5862#comment-4998 302 diversion header - this works if you set up a DID directly to an extension. Then on the extension you have an option - Enable 302 diversion header. DND on the phone. You can change status through voicemail menu at the moment. There are 2 star dial codes for DND - (the previous away and available) 302 diversion header – this works if you set up a DID directly to an extension.
Then on the extension you have an option – Enable 302 diversion header.

DND on the phone. You can change status through voicemail menu at the moment. There are 2 star dial codes for DND – (the previous away and available)

]]> By: Abdulah Faiz http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-4993 Abdulah Faiz Fri, 28 May 2010 17:07:52 +0000 http://www.3cx.com/blog/?p=5862#comment-4993 Great ! Would like to see some more features: - Fax Send feature - Outbound rules to control extensions calls according to office hours - Call Reporter enhancements by selection of extensions - Easier Server Activity monitoring calls and filter calls from / to ext. for diagnostic purpose Great !

Would like to see some more features:
- Fax Send feature
- Outbound rules to control extensions calls according to office hours
- Call Reporter enhancements by selection of extensions
- Easier Server Activity monitoring calls and filter calls from / to ext. for diagnostic purpose

]]> By: Nick Whittome http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-4989 Nick Whittome Fri, 28 May 2010 14:39:55 +0000 http://www.3cx.com/blog/?p=5862#comment-4989 Great work guys! I hope that you might also consider that a user can hit the DND on their phone and it will automatically set their status as well (as an option). We keep getting asked for this. Great work guys!

I hope that you might also consider that a user can hit the DND on their phone and it will automatically set their status as well (as an option). We keep getting asked for this.

]]> By: Jim http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-4988 Jim Fri, 28 May 2010 14:23:13 +0000 http://www.3cx.com/blog/?p=5862#comment-4988 Great news! I would like to try the "Ability to send a 302 diversion header to forward a call to another number" with Tele2 who requires this to keep original caller ID when forwarding calls to external numbers. Do you have any description of how to do this? Looked through the admin manual and didn't find anything. Great news!

I would like to try the “Ability to send a 302 diversion header to forward a call to another number” with Tele2 who requires this to keep original caller ID when forwarding calls to external numbers.

Do you have any description of how to do this? Looked through the admin manual and didn’t find anything.

]]> By: 3CX VoIP TK Anlage Blog » 3CX Phone System Version 9 beta 1 is here! http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-4986 3CX VoIP TK Anlage Blog » 3CX Phone System Version 9 beta 1 is here! Fri, 28 May 2010 13:41:21 +0000 http://www.3cx.com/blog/?p=5862#comment-4986 [...] Continue reading here: 3CX Phone System Version 9 beta 1 is here! [...] [...] Continue reading here: 3CX Phone System Version 9 beta 1 is here! [...]

]]> By: Igor Snezhko http://www.3cx.com/blog/releases/3cx-phone-system-version-9-beta-1/comment-page-1/#comment-4984 Igor Snezhko Fri, 28 May 2010 13:16:49 +0000 http://www.3cx.com/blog/?p=5862#comment-4984 Thanks Nick! I will translate ASAP! Thanks Nick! I will translate ASAP!

]]>