• Releases

    3CX Product Releases

  • VoIP How To

    Technical tips to run your VoIP PBX more efficiently

  • Events

    3CX Trainings and Webinars around the world

  • Docs & FAQs

    3CX Documentation how to and FAQ

  • Phone configuration

    3CX, Aastra, Cisco, Yealink, Grandstream, Polycom configs

firmware

Upgrading firmware on Grandstream GXW-4104/GXW-4108 Gateway

March 1, 2011 - 10:12 pm | 0 Comments

Downgrading or Upgrading the firmware of a Grandstream GXW-4104, GXW-4108 gateway for use with 3CX Phone System for Windows

......Read More »

How to Install and Configure a TFTP Server

March 1, 2011 - 10:12 pm | 2 Comments

TFTP stands for Trivial File Transfer Protocol simply because of its simplicity.  It is mainly used for automated file transfers between machines on UDP Port 69.  In a VoIP environment TFTP is used to upload firmware files to Gateways and Phones and other hardware. Step 1: Download a TFTP Server 1.  You will find pumpkin is an open source TFTP client that is simple to use, follow the link and

......Read More »

Using Patton FXS Gateways with 3CX PhoneSystem

December 16, 2010 - 4:07 pm | 4 Comments

Note 1: These devices have been tested for Fax and Voice using firmware ‘Smartware 5.4 Build Series 2009-11-18‘ versions available from http://upgrades.patton.com/submodelselect.asp?model=SmartNode

......Read More »

Upgrading firmware of Yealink phones from the 3CX Mgmnt Console

December 6, 2010 - 3:25 pm | 4 Comments

Upgrading firmware of Yealink T20, T22, T26, T28 phones from the 3CX Mgmnt Console

......Read More »

Upgrading firmware of Cisco phones from the 3CX Mgmnt Console

December 6, 2010 - 1:56 pm | 2 Comments

Upgrading firmware of Cisco phones from the 3CX Mgmnt Console

......Read More »

Upgrading firmware of Aastra phones from the 3CX Management Console

December 6, 2010 - 1:08 pm | 2 Comments

In this article we explain how you can upgrade the firmware of one or more Aastra phones in your network from the 3CX Management console. In this example we upgrade an Aastra 6757i to the latest firmware. Pre-requisites Download the latest firmware available for your phone model. It is recommended to use 3CX Tested firmwares 3CXPhone System Version 9 SP4 and up is required

......Read More »

Upgrading the firmware of IP Phones network-wide with 3CX v9 SP4

December 2, 2010 - 8:00 am | 19 Comments

3CX Phone System Version 9 features the ability to easily upgrade your IP Phone’s firmware network wide. This is done using the Phone Provisioning node located in the “Settings” section. Pre-requisites Download the latest firmware available for your phone model. It is recommended to use 3CX Tested firmwares 3CXPhone System Version 9 SP4 and up is required You can upgrade firmwares for the following phones – click on each link to

......Read More »

Firmware Upgrade on a Cisco SPA-50x SIP Phone

September 17, 2010 - 1:07 pm | 5 Comments

Using the recommended Firmware version is one of the keys for successful interoperability with 3CX PhoneSystem. From time to time, 3CX will release updates to the configuration guides that often include additional functionality that takes advantage of more recent phone Firmware versions. Note: This document refers to 3CX PhoneSystem V9 SP3 or Earlier. For later versions of 3CX PhoneSystem, please refer to: http://www.3cx.com/blog/ip-phone-configuration/upgrading-firmware-cisco/ This document will demonstrate how to upgrade

......Read More »

Updating a Beronet BeroFix VoIP Gateway to the latest firmware

December 5, 2009 - 8:11 pm | 0 Comments

If you are not running the latest version of the firmware, please update your Beronet device firmware to the recommended version as explained below. Update Procedure To update go to http://www.beronet.com/downloads/berofix/ and download the appropriate update. Log on to the beroFix Webinterface, click on Preferences / Update Tool or Management / Update Tool depending on the Firmware Reboot the device after updating

......Read More »

How do I update a Patton Smartnode to the latest firmware?

October 3, 2009 - 7:38 pm | 0 Comments

This document explains step by step how to upgrade the firmware of your Patton to the latest version. This doc uses the Patton 4554 as an example, however all other Patton devices follow an almost identical procedure. Step 1: Download the appropriate firmware for your Patton 1. Go to the firmware repository on the Patton website. The ones we are interested in are: http://upgrades.patton.com/submodelselect.asp?model=SmartNode 2. Now choose the Smartware firmware

......Read More »

3CX PHONE SYSTEM

PRODUCTS

TECHNICAL INFORMATION

PRODUCT DOCUMENTATION

All Rights Reserved © 2012, 3CX

Switch to our mobile site