Featured »
3CX Phone System 10 Service Pack 5
December 7, 2011 – 6:58 pm | 16 Comments

3CX is pleased to announce a new release of 3CX Phone System 10, build 22686. Service Pack 5 fixes numerous 3CX Wallboard issues and also adds a new and important caller ID feature. To download …

Read the full story »
Releases

3CX Product Releases

VoIP How To

Technical tips to run your VoIP PBX more efficiently

Events

3CX Trainings and Webinars around the world

Docs & FAQ

3CX Documentation how to and FAQ

Phone configuration

3CX, Aastra, Cisco, Yealink, Grandstream, Polycom configs

Home » Docs & FAQ, VoIP How To

BeroNet bero*fix Box Configuration

Submitted by on March 18, 2010 – 7:13 pmNo Comment

This guide will show you how to configure a Beronet bero*fix box. The main target of this guide is to connect the bero*fix card with the LAN and WAN.

.

.

Setting up the BeroNet bero*fix 400/1600/6400

  1. Connect the box to the network and plug in power supply
  2. The default IP address of the bero*fix  is 10.0.0.2/16.  If your LAN operates in the same network make sure that the IP during the configuration is free.  If this IP is taken by another host you can attach the box to your computer directly with a normal network cable.
  3. Assign your PC network card to the IP 10.0.0.1/16 or any free IP from this network segment.
  4. Open the web interface of the bero*fix by pointing a browser to http://10.0.0.2

    The default credentials for the Beronet web interface are Username: admin, Password: admin
  5. Go to Preferences > Network settings and change the IP Address to a free IP in your network.  In this example we will use 10.172.0.212
  6. Save the settings and reboot the Beronet. On next startup, you will be able to access the Beronet bero*fix web configuration interface by pointing a browser to this new IP Address -  http://10.172.0.212

Comments are closed.