• Releases

    3CX Product Releases

  • VoIP How To

    Technical tips to run your VoIP PBX more efficiently

  • Events

    3CX Trainings and Webinars around the world

  • Docs & FAQs

    3CX Documentation how to and FAQ

  • Phone configuration

    3CX, Aastra, Cisco, Yealink, Grandstream, Polycom configs

Home > Docs and FAQ > Configuring IP Phone LCD Display language with 3CX Phone System

Configuring IP Phone LCD Display language with 3CX Phone System

By December 2, 2010 | 10 Comments

3CX Phone System features the ability to easily change your IP Phone’s LCD display language network wide or on a per phone basis. Pre-requisites

  • Download & install the available language packs for your phone model – Not all models require Language packs.
  • It is recommended to use 3CX Tested firmwares – not all firmwares support language display changes
  • 3CXPhone System Version 9 SP4 and later is required

After you have installed the appropriate language packs (follow links below for instructions specific to your phone), you can select the preferred phone display language in the Extensions ‘Phone Provisioning’ tab.  The restart the phone.

  • Yealink – Supported languages are included in the firmware, select preferred display language and restart phone
  • Aastra phones -Install language packs according to this procedure
  • Cisco/Linksys – Install language packs according to this procedure
  • Grandstream – Install language packs according to this procedure
  • Polycom phones – changing of display language is not supported

Comment 10

  • 3CX VoIP blog » IP Phone firmware upgrade with 3CX Phone System SP4
    December 1st, 2010

    [...] articles and FAQ: Provision Aastra phones, Change LCD Display languages, Aastra manual [...]

  • 3CX VoIP Blog » IP Phone LCD Display language with 3CX SP4
    December 2nd, 2010

    [...] Excerpt from: IP Phone LCD Display language with 3CX SP4 [...]

  • 3CX VoIP blog » Upgrading firmware of Aastra phones
    December 6th, 2010

    [...] Changing the LCD Display language [...]

  • 3CX VoIP blog » Upgrading firmware of Cisco phones
    December 6th, 2010

    [...] Changing the LCD Display languages on Cisco / Linksys phones [...]

  • 3CX VoIP blog » Upgrading firmware of Grandstream IP phones
    December 6th, 2010

    [...] Change LCD Display languages, [...]

  • 3CX VoIP blog » Upgrading firmware of Yealink phones
    December 6th, 2010

    [...] Changing the LCD Display language [...]

  • 3CX VoIP Blog » Configuring IP Phone LCD Display language with 3CX SP4
    December 6th, 2010

    [...] Originally posted here: Configuring IP Phone LCD Display language with 3CX SP4 [...]

  • 3CX VoIP Blog » Configuring IP Phone LCD Display language with 3CX SP4
    December 6th, 2010

    [...] See the article here: Configuring IP Phone LCD Display language with 3CX SP4 [...]

  • 3CX VoIP Blog » Configuring IP Phone LCD Display language with 3CX SP4
    December 6th, 2010

    [...] Visit link: Configuring IP Phone LCD Display language with 3CX SP4 [...]

  • 3CX VoIP TK Anlage Blog » Configuring IP Phone LCD Display language with 3CX SP4
    December 8th, 2010

    [...] See the article here: Configuring IP Phone LCD Display language with 3CX SP4 [...]

Switch to our mobile site