3CX is pleased to announce a new release of 3CX Phone System 10, build 22686. Service Pack 5 fixes numerous 3CX Wallboard issues and also adds a new and important caller ID feature. To download …
Read the full story »3CX Product Releases
Technical tips to run your VoIP PBX more efficiently
3CX Trainings and Webinars around the world
3CX Documentation how to and FAQ
3CX, Aastra, Cisco, Yealink, Grandstream, Polycom configs
This nugget shows how to setup an external extension using direct SIP.
Using the VoIP client as an example it walks you through the process of configuring extensions that reside outside your LAN.
If you need a simple SIP-based video door phone, the Robin Smartview should provide a simple solution. This document will explain the steps necessary to set up, configure, and test one of these devices for …
The 3CX training team is pleased to announce upcoming 3CX Partner Training events in the Netherlands.
We would like to invite all new or active 3CX partners to attend the 2 days of training on February …
If you need a simple SIP-based video door phone, the Robin Smartview should provide a simple solution. This document will explain the steps necessary to set up, configure, and test one of these devices for …
Quality and affordable VoIP PBX solution available to all 3CX Phone System customers thanks to successful integration testing with leading VoIP provider, ippi.
London, UK and Paris, France – 26 January 2012 – 3CX, developer of …
3CX is pleased to announce a new release of 3CX Phone System 10, build 22686. Service Pack 5 fixes numerous 3CX Wallboard issues and also adds a new and important caller ID feature. To download …
If you need a simple SIP-based video door phone, the Robin Smartview should provide a simple solution. This document will explain the steps necessary to set up, configure, and test one of these devices for …
300 seconds = 5 minutes, not 10 minutes.
Hi,
I did not get this working until I enabled nat mapping in addition to all that was done in this tutorial. The setting can be found in the Ext tab under Nat Mapping Enable:
http://terisk.com/images/NAT%20Mapping%20Enable.PNG
Thanks a lot…it worked… :-)