[ykeita]

Bonjour,
J'ai réalisé l'interconnexion de mon système 3CX avec un autocom alcatel4200 à laide d'un gateway unicom 6080. l'acheminement des appels se fait correctement dans les 2 sens. Seulement le système 3CX n'arrive pas à récupérer les numéros des appels entrants, c'est le numéro du port (correspondant à l'extension virtuelle de ce port dans 3CX) qui s'affiche. Y'a t-il une solution pour récupérer les numéro des appels entrants?

[ykeita]

Voici ci-dessous le log d'état de mon server:

14:39:04.448 [CM503008]: Call(898): Call is terminated
14:38:46.136 [MS211000] C:898.1: 192.168.0.200:5008 is delivering DTMF using RTP payload (RFC2833). In-Band DTMF tone detection is disabled for this call segment.
14:38:44.340 Currently active calls - 1: [898]
14:38:36.293 [CM503007]: Call(898): Device joined: sip:201@192.168.0.212:5060
14:38:36.277 [CM503007]: Call(898): Device joined: sip:10001@192.168.0.200:5062
14:38:27.293 [CM503008]: Call(896): Call is terminated
14:38:26.481 [CM505001]: Ext.201: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Hanlong Unicorn4102M V1.0.0.36] PBX contact: [sip:201@192.168.0.2:5060]
14:38:26.481 [CM503002]: Call(898): Alerting sip:201@192.168.0.212:5060
14:38:26.371 [CM503025]: Call(898): Calling Ext:Ext.201@[Dev:sip:201@192.168.0.212:5060]
14:38:26.324 [CM503004]: Call(898): Route 1: Ext:Ext.201@[Dev:sip:201@192.168.0.212:5060]
14:38:26.309 [CM503010]: Making route(s) to <sip:201@192.168.0.2:5060>
14:38:26.309 [CM505002]: Gateway:[unicom01] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Hanlong Unicorn6080 V1.0.0.31] PBX contact: [sip:10001@192.168.0.2:5060]
14:38:26.293 [CM503001]: Call(898): Incoming call from 10001@(Ln.10001@unicom01) to <sip:201@192.168.0.2:5060>
14:38:26.293 [CM503012]: Inbound any hours rule (201) for 10001 forwards to DN:201
14:38:20.246 [CM503007]: Call(896): Device joined: sip:999@127.0.0.1:40600;rinstance=0ab62a4f4923bbba
14:38:20.231 [CM503007]: Call(896): Device joined: sip:10000@192.168.0.200:5060
14:38:20.231 [CM505001]: Ext.999: Device info: Device Identified: [Man: 3CX Ltd.;Mod: Voice Mail Menu;Rev: General] Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [3CX Voice Mail Menu] PBX contact: [sip:999@127.0.0.1:5060]
14:38:20.231 [CM503002]: Call(896): Alerting sip:999@127.0.0.1:40600;rinstance=0ab62a4f4923bbba
14:38:20.121 [CM503003]: Call(896): Call to sip:200@192.168.0.2 has failed; Cause: 480 Temporarily not available; from IP:192.168.0.213:5060
14:38:20.106 [CM503025]: Call(896): Calling Ext:Ext.999@[Dev:sip:999@127.0.0.1:40600;rinstance=0ab62a4f4923bbba]
14:38:20.043 [CM503005]: Call(896): Forwarding: Ext:Ext.999@[Dev:sip:999@127.0.0.1:40600;rinstance=0ab62a4f4923bbba]
14:38:17.043 [CM503020]: Normal call termination. Reason: Not found
14:38:17.043 [CM503016]: Call(897): Attempt to reach <sip:158@192.168.0.2:5060;user=phone> failed. Reason: Not Found
14:38:17.043 [CM503014]: Call(897): No known route to target: <sip:158@192.168.0.2:5060;user=phone>
14:38:17.012 [CM503010]: Making route(s) to <sip:158@192.168.0.2:5060;user=phone>
14:38:17.012 [CM505001]: Ext.215: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Hanlong Unicorn6008 V1.0.0.36] PBX contact: [sip:215@192.168.0.2:5060]
14:38:16.997 [CM503001]: Call(897): Incoming call from Ext.215 to <sip:158@192.168.0.2:5060;user=phone>