Heureux (ou malheureux...) possesseur d'un DFL-800 Dlink, j'ai un mal fou à le paramètrer pour que le PBX fonctionne correctement.
J'ai créé mes règles NAT comme d'habitude mais au moment du test du Pare-feu du 3CX, j'ai les messages suivants
<18:43:54>: Phase 1, checking servers connection, please wait...
<18:43:54>: Stun Checker service is reachable. Phase 1 check passed.
<18:43:54>: Phase 2a, Check Port Forwarding to UDP SIP port, please wait...
<18:43:54>: UDP SIP Port is set to 5060. Response received WITH TRANSLATION 45208::5060. Phase 2a check passed with WARNINGS. Some functionality will be LIMITED. For more information, please visit http://www.3cx.com/blog/docs/firewall-checker/
<18:43:54>: Phase 2b. Check Port Forwarding to TCP SIP port, please wait...
<18:43:55>: TCP SIP Port is set to 5060. Response received WITH TRANSLATION 45208::5060. Phase 2b check passed with WARNINGS. Some functionality will be LIMITED. For more information, please visit http://www.3cx.com/blog/docs/firewall-checker/
<18:43:55>: Phase 3. Check Port Forwarding to TCP Tunnel port, please wait...
<18:43:55>: TCP TUNNEL Port is set to 5090. Response received WITH TRANSLATION 50103::5090. Phase 3 check passed with WARNINGS. Some functionality will be LIMITED. For more information, please visit http://www.3cx.com/blog/docs/firewall-checker/
<18:43:55>: Phase 4. Check Port Forwarding to RTP external port range, please wait...
<18:44:03>: UDP RTP Port 9000. Response received WITH TRANSLATION 56493::9000. Phase 4-01 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/blog/docs/firewall-checker/
<18:44:03>: UDP RTP Port 9001. Response received WITH TRANSLATION 59788::9001. Phase 4-02 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/blog/docs/firewall-checker/
<18:44:03>: UDP RTP Port 9002. Response received WITH TRANSLATION 22318::9002. Phase 4-03 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/blog/docs/firewall-checker/
<18:44:03>: UDP RTP Port 9003. Response received WITH TRANSLATION 63118::9003. Phase 4-04 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/blog/docs/firewall-checker/
<18:44:03>: UDP RTP Port 9004. Response received WITH TRANSLATION 2803::9004. Phase 4-05 check passed with WARNINGS. Some functionality may be IMPAIRED. For more information, please visit http://www.3cx.com/blog/docs/firewall-checker/
Application exit code is 53
Ma question est simple. Quelle est la procédure pour créer un mapage statique dans le DFL 800 ?
J'ai lu et relu la doc du DFL sans trouver de solution.
Une idée ?
Merci pour votre aide et bonne et heureuse année à tous.
