GrandStream error

User to User - Answers are provided by the community. 3CX does NOT provide technical support via this forum. Commercial grade support should NOT be expected

Moderators: kevin, 3CX staff

GrandStream error

Postby Warren.Bedser » Tue Jan 31, 2012 7:41 am

Hi there

We have experienced this at one of our clients. All the incoming calls go to voicemail. When looking at the server event log, i noticed these 2 error message:

Call to 00110197061@(Ln.10000@Switch) has failed. [ V4 196.38.164.132:5060 UDP target domain=unspecified mFlowKey=772 ] replied: 503 Service Unavailable; from IP:196.38.164.132:5060

Device unknown@(Ln.10001@Grandstream_GXW4104) had no available outgoing trunk(s) for Call(1302)

Why would this happen?

Thanks

Warren
Warren.Bedser
New User
 
Posts: 9
Joined: Thu Nov 17, 2011 10:49 am

Re: GrandStream error

Postby lneblett » Tue Jan 31, 2012 1:19 pm

Am not sure I fully understand, likely need more of the log. On the one hand you indicate that all "incoming" calls go to voice mail. This implies to me that the caller is able to get through to the 3CX system and attempts to put the call through to a desired extension, but your posting doesn't reflect this. You might want to check the inbound rules and see if somehow it got changed and the trunks are instantly being redirected to an extension or sending directly to a voicemail box. Do you have a digital receptionist established and do the callers get to this? if so, you may want to see if perhaps some of the rules associated to the input of the DTMF keys may have changed or need updating. Next, check to see if the 3CX system was put into emergency mode (see the Advanced Settings tab and then the tab for dial codes). And lastly, look at the office hours and ensure that they are correct for the need and that the associated routings fit the purpose. Let's start with this aspect first as the second diagnostic line may be fixed by checking and correcting the first issue, if needed.
lneblett
Expert
Expert
 
Posts: 191
Joined: Tue Sep 07, 2010 6:47 pm
Location: Harlingen, Texas

Re: GrandStream error

Postby GSsupport » Mon Feb 13, 2012 6:21 pm

Hi Warren.Bedser,

Firstly, please make sure that you followed the guide to setup your GXW410x with 3CX :
http://www.grandstream.com/products/gxw ... op_3cx.pdf

If the setup is correct, and you applied lneblett's suggestions but with no luck
Then I will suggest you create a ticket on Grandstream ticketing system to get support; since more traces are needed to troubleshoot this case
http://www.grandstream.com/support/submit-a-ticket

Best regards,
GSsupport
GSsupport
New User
 
Posts: 10
Joined: Mon Jan 31, 2011 7:30 pm


Return to 3CX Phone System - General (Community-led, no tech support)


Who is online

Users browsing this forum: No registered users and 2 guests

Announcements: