Interner ISDN über Patton

Allgemeiner Support zur 3CX IP-Telefonanlage sowie zu VoIP und SIP (Community-gestützt).User-to-User-Support - Forum zum Erfahrungsaustausch mit anderen 3CX-Anwendern. Über dieses Forum steht KEIN technischer Support durch 3CX zur Verfügung.

Moderators: kevin, 3CX staff

Interner ISDN über Patton

Postby rgrunert » Mon Apr 12, 2010 7:22 pm

Hallo,

hat schon mal jemand einen internen ISDN-Bus über das Patton-Gateway realisiert?
Wir nutzen einen SN-4638 und haben noch zwei Ports frei dafür. Nur wie einstellen?
Für die Einstellungen per Hand fehlen mir hier die Erfahrungen und eine Art Template
oder Anleitung habe ich bisher nicht gefunden, auch nicht über die Suche hier.

Oder gibt es eine andere Lösung? Hintergrund ist, wir benutzen eine SW welche die
Verbindung ausschließlich über ISDN erwartet (heute Fritz-Card).
Rolf Grunert
BCS - business communication services
rgrunert
Expert
Expert
 
Posts: 134
Joined: Wed Aug 19, 2009 6:38 pm
Location: Germany - Rostock

Re: Interner ISDN über Patton

Postby groundhog » Mon Apr 12, 2010 7:44 pm

Ich habe bislang auch Patton eingesetzt und Lösungen, wie von Dir beschrieben beim Disti machen lassen.
Kosten ca. 100 €.

Problem: Hast Du was nicht 100% verstanden (Kundenanforderung) oder formuliert (Auftrag an Disti) hast Du möglicherweise ein Problem das Du nicht vor Ort selbst lösen kannst.
Gerade bei Patton musst Du vieles einfach wissen und komst mit Logig nicht immer weiter.

Daher arbeite ich in letzter Zeit mit Beronet, auch wenn ich da noch nicht alles getestet habe.
Veiser Gebäudetechnik GmbH
Ihr ITK Infrastruktur-Dienstleister im Rheinland
http://www.Veiser.de
groundhog
3CX Valued Professional
3CX Valued Professional
 
Posts: 602
Joined: Sat Jul 04, 2009 10:49 am
Location: Neuss-Norf, Germany

Re: Interner ISDN über Patton

Postby rgrunert » Tue Apr 13, 2010 5:57 pm

Danke, werde dann wohl diesen Weg gehen müssen, erst mal. Vielleicht pflegt das 3CX-Team ja mal ein Template dafür ein.
Rolf Grunert
BCS - business communication services
rgrunert
Expert
Expert
 
Posts: 134
Joined: Wed Aug 19, 2009 6:38 pm
Location: Germany - Rostock

Re: Interner ISDN über Patton

Postby StefanW » Wed Apr 14, 2010 9:28 am

um nur deine Hoffnungen zu begrenzen, Wahrscheinlichkeit 1%
(hab die 1 geschrieben weil die Hoffnung stirbt zu letzt...)
Sorry

BeroNet:
http://www.3cx.de/blog/beronet-msn-did-umleitung/
==================================
Stefan Walther
Technical Support Engineer
3CX - Developers of IP PBX Software
StefanW
3CX Support
3CX Support
 
Posts: 2008
Joined: Tue Jun 02, 2009 7:29 am
Location: Cyprus // Zypern (Nicosia)

Re: Interner ISDN über Patton

Postby groundhog » Thu Apr 15, 2010 7:12 am

Hätte ich nicht schöner schreiben können.

Daher versuche ich es jetzt mit BeroNet, die arbeiten (bis jetzt) mit Logik statt Heckmeck.
Veiser Gebäudetechnik GmbH
Ihr ITK Infrastruktur-Dienstleister im Rheinland
http://www.Veiser.de
groundhog
3CX Valued Professional
3CX Valued Professional
 
Posts: 602
Joined: Sat Jul 04, 2009 10:49 am
Location: Neuss-Norf, Germany

Re: Interner ISDN über Patton

Postby StefanW » Thu Apr 15, 2010 8:27 am

das dieses so bleibt werde ich schon sorge dafür tragen. mache recht viel Werbung dafür genau aus diesem Grund...
==================================
Stefan Walther
Technical Support Engineer
3CX - Developers of IP PBX Software
StefanW
3CX Support
3CX Support
 
Posts: 2008
Joined: Tue Jun 02, 2009 7:29 am
Location: Cyprus // Zypern (Nicosia)

Re: Interner ISDN über Patton

Postby rgrunert » Tue Jul 27, 2010 6:45 pm

Habe zu diesem Thema eine Lösung für den Patton zugearbeitet bekommen, Funktionalität ist perfekt. Der Verbindungsaufbau der Fritzcard wird an die ISDN-Basisanschlüsse geroutet und die gewünschte DDI wird übertragen, Funktion ist nur ausgehend.
Rolf Grunert
BCS - business communication services
rgrunert
Expert
Expert
 
Posts: 134
Joined: Wed Aug 19, 2009 6:38 pm
Location: Germany - Rostock

Re: Interner ISDN über Patton

Postby StefanW » Wed Jul 28, 2010 8:07 am

erleuchte uns was patton in die Routing Tabel Natting Tables und Complex Funktions geschrieben hat.
==================================
Stefan Walther
Technical Support Engineer
3CX - Developers of IP PBX Software
StefanW
3CX Support
3CX Support
 
Posts: 2008
Joined: Tue Jun 02, 2009 7:29 am
Location: Cyprus // Zypern (Nicosia)

Re: Interner ISDN über Patton

Postby groundhog » Wed Jul 28, 2010 1:10 pm

Ja, bitte. Kannst Du die Konfiguration hier einstellen?
Veiser Gebäudetechnik GmbH
Ihr ITK Infrastruktur-Dienstleister im Rheinland
http://www.Veiser.de
groundhog
3CX Valued Professional
3CX Valued Professional
 
Posts: 602
Joined: Sat Jul 04, 2009 10:49 am
Location: Neuss-Norf, Germany

Re: Interner ISDN über Patton

Postby rgrunert » Wed Jul 28, 2010 6:06 pm

hier die config, wer mal ein ähnliches Thema hat => Allnet.

#----------------------------------------------------------------#
# #
# SN4638/5BIS #
# R5.3 2009-03-18 H323 SIP BRI #
# 2010-07-19T14:19:01 #
# SN/00A0BA055A9E #
# Generated configuration file #
# #
#----------------------------------------------------------------#

cli version 3.20
dns-client server 192.168.xxx.xxx
dns-client server 192.168.xxx.xxx
webserver port 80 language en
sntp-client
sntp-client server primary ptbtime1.ptb.de port 123 version 4
sntp-client server secondary ptbtime2.ptb.de port 123 version 4

system

ic voice 0

system
clock-source 1 bri 0 0
clock-source 2 bri 0 1
clock-source 3 bri 0 2
clock-source 4 bri 0 3
clock-source 5 bri 0 4

profile ppp default

profile call-progress-tone defaultDialtone
play 1 1000 425 0

profile call-progress-tone defaultBusytone
play 1 480 425 -7
pause 2 480

profile call-progress-tone defaultReleasetone
play 1 240 425 -7
pause 2 240

profile call-progress-tone defaultCongestiontone
play 1 240 425 -7
pause 2 240

profile tone-set default

profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
fax transmission 1 relay t38-udp

profile pstn default

profile sip default

profile aaa default
method 1 local
method 2 none

context ip router

interface IF_IP_WAN
ipaddress dhcp
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

interface IF_IP_LAN
ipaddress 192.168.xxx.xxx 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

context cs switch
national-prefix 0
international-prefix 00

routing-table called-e164 RT_ISDN_TO_SIP_0
route T2 dest-interface IF_SIP_0 MAPPING_INCOMING_CALLS

routing-table called-e164 RT_ISDN_TO_SIP_1
route T2 dest-interface IF_SIP_1 MAPPING_INCOMING_CALLS

routing-table called-e164 RT_ISDN_TO_SIP_2
route T2 dest-interface IF_SIP_2 MAPPING_INCOMING_CALLS

routing-table called-e164 RT_ISDN_daten
route T3 dest-service datencall SET_NR

mapping-table calling-pi to calling-e164 MAP_REMOVE_BLANK_CALLERID
map restricted to ""

mapping-table calling-e164 to calling-e164 MAP_LEADING_ZERO
map (.%) to \1

mapping-table calling-e164 to calling-e164 SET_NR
map default to 23

complex-function MAPPING_INCOMING_CALLS
execute 1 MAP_REMOVE_BLANK_CALLERID
execute 2 MAP_LEADING_ZERO

interface isdn IF_ISDN_0
route call dest-table RT_ISDN_TO_SIP_0
call-hold disable

interface isdn IF_ISDN_1
route call dest-table RT_ISDN_TO_SIP_1
call-hold disable

interface isdn IF_ISDN_2
route call dest-table RT_ISDN_TO_SIP_2
call-hold disable

interface isdn IF_ISDN_3
route call dest-table RT_ISDN_daten
call-hold disable

interface sip IF_SIP_0
bind context sip-gateway GW_SIP_0
route call dest-interface IF_ISDN_0
remote 192.168.xxx.xxx
early-connect
early-disconnect
address-translation outgoing-call request-uri user-part fix 10000 host-part to-header target-param none

interface sip IF_SIP_1
bind context sip-gateway GW_SIP_1
route call dest-interface IF_ISDN_1
remote 192.168.xxx.xxx
early-connect
early-disconnect
address-translation outgoing-call request-uri user-part fix 10001 host-part to-header target-param none

interface sip IF_SIP_2
bind context sip-gateway GW_SIP_2
route call dest-interface IF_ISDN_2
remote 192.168.xxx.xxx
early-connect
early-disconnect
address-translation outgoing-call request-uri user-part fix 10002 host-part to-header target-param none

service hunt-group datencall
cyclic
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface IF_ISDN_0
route call 2 dest-interface IF_ISDN_1
route call 3 dest-interface IF_ISDN_2

context cs switch
no shutdown

authentication-service AS_ALL_LINES
realm 1 3CXPhoneSystem
username 10000 password LbFCDNv4/Fk= encrypted
username 10001 password dZ8edXkjFnM= encrypted
username 10002 password iAaKwKfxX4Q= encrypted


location-service LS_10000
domain 1 192.168.xxx.xxx

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10000

identity 10000

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 192.168.xxx.xxx
lifetime 300
register auto

location-service LS_10001
domain 1 192.168.xxx.xxx

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10001

identity 10001

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 192.168.xxx.xxx
lifetime 300
register auto

location-service LS_10002
domain 1 192.168.xxx.xxx

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10002

identity 10002

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 192.168.xxx.xxx
lifetime 300
register auto

context sip-gateway GW_SIP_0

interface LAN
bind interface IF_IP_LAN context router port 5060

context sip-gateway GW_SIP_0
bind location-service LS_10000
no shutdown

context sip-gateway GW_SIP_1

interface LAN
bind interface IF_IP_LAN context router port 5062

context sip-gateway GW_SIP_1
bind location-service LS_10001
no shutdown

context sip-gateway GW_SIP_2

interface LAN
bind interface IF_IP_LAN context router port 5064

context sip-gateway GW_SIP_2
bind location-service LS_10002
no shutdown

port ethernet 0 0
medium auto
encapsulation ip
bind interface IF_IP_WAN router
no shutdown

port ethernet 0 1
medium auto
encapsulation ip
bind interface IF_IP_LAN router
no shutdown

port bri 0 0
clock auto
encapsulation q921

q921
protocol pp
uni-side auto
encapsulation q931

q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_ISDN_0 switch

port bri 0 0
no shutdown

port bri 0 1
clock auto
encapsulation q921

q921
protocol pp
uni-side auto
encapsulation q931

q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_ISDN_1 switch

port bri 0 1
no shutdown

port bri 0 2
clock auto
encapsulation q921

q921
protocol pp
uni-side auto
encapsulation q931

q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_ISDN_2 switch

port bri 0 2
no shutdown

port bri 0 3
clock auto
power-feed
encapsulation q921

q921
uni-side auto
encapsulation q931

q931
protocol dss1
uni-side net
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_ISDN_3 switch

port bri 0 3
no shutdown

port bri 0 4
clock auto
encapsulation q921

q921
protocol pp
uni-side auto
encapsulation q931

q931
protocol dss1
uni-side net
bchan-number-order ascending

port bri 0 4
shutdown
Rolf Grunert
BCS - business communication services
rgrunert
Expert
Expert
 
Posts: 134
Joined: Wed Aug 19, 2009 6:38 pm
Location: Germany - Rostock


Return to Deutsch


Who is online

Users browsing this forum: No registered users and 0 guests

Announcements: