[ulises]

Hi, I have install a demo with 3CX v10 and a Grandstream Analog Gateway GXW4104.
I install everything by the book and all works fine, but I got a question from a client and wanted to share it with everybody to see if I can get some help.
With the Gateway is easy to assign each incoming line to a specific Recepcionist or any extension, but what if you want to get an outgoing call throw a specific line in the gateway, is there a way to do this?
This is a 4 FXO gateway and they have a special line with international calls included and every time someone wants to make and international call they want the call routed throw this line.

Thanks

Ulises Boom
Dominican Republic

[leejor]

You might want to read over this post..outgoing-calls-from-gxw4104-13940.html

What you want to do is, rather than having all 4 trunks in one group, create 4 trunk groups, with one in each. then you can send calls to any of the 4 trunks.

[ulises]

You might want to read over this post..outgoing-calls-from-gxw4104-13940.html

What you want to do is, rather than having all 4 trunks in one group, create 4 trunk groups, with one in each. then you can send calls to any of the 4 trunks.

Thanks, I'll try and let you know how it goes.