[loki]

Hi All,

I just completed a 3CX install for a client, and am having some issues.

I keep getting the below error in the server event log:

Call to 780xxxxxxx@(Ln.10002@192.168.0.3) has failed. [ V4 192.168.0.3:5066 UDP target domain=unspecified mFlowKey=772 ] replied: 502 Bad Gateway; from IP:192.168.0.3:5066

I'm also getting some of this in the server activity log:
09:36:29.343 [MS105000] C:60.2: No RTP packets were received:remoteAddr=127.0.0.1:40098,extAddr=0.0.0.0:0,localAddr=127.0.0.1:7364

Some of the system specs:
Running on Windows Server 2003R2
All phones are GrandStream GXP2100
Using one HandyTone 503 device to register a couple analog portable phones.
3CX V10
Patton SN4114

Any help would be appreciated!

[Ian Joyce]

Were you able to remedy this problem? The Patton should be pretty straightforward to configure with 3CX.

http://www.888voip.com/configuring-a-pa ... -with-3cx/

[loki]

Hi there,

Thanks for the response!

It actually wasn't the patton causing the issue. I updated the firmware on the GrandStream GXP 2100 and the issue took care of itself.

Cheers

Alen

[Ian Joyce]

Great! I am glad to know you worked it out.