3CX PBX

User to user support
It is currently Tue Jun 18, 2013 11:59 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Problemen met bellen
PostPosted: Tue Oct 18, 2011 12:10 pm 
Offline
New User

Joined: Tue Oct 18, 2011 11:43 am
Posts: 7
We hebben regelmatig het euvel dat we extern willen bellen, maar dat er geen connectie gemaakt word. We krijgen als response in de 3cxserver "408 Request Timeout; internal". Ik heb het in de gaten gehouden, en nu blijkt er geen connectie gemaakt te worden met de trunk die we hebben. Dit gebeurt ad-random, en is lastig te traceren... :(
Laatste melding "Call to 06********@(Ln.10000@Prionet) has failed. [ V4 91.195.160.2:5060 UDP target domain=unspecified mFlowKey=848 ] replied: 480 Limit reached (max_rwaits); from IP:91.195.160.2:5060"
(06 even *** van gemaakt, maar is volledig nummer)

Goed, de config:
- Windows Server 2008,
- 2 netwerkinterfaces, beide een apart subnet
Ethernet adapter Local Area Connection 1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection
Physical Address. . . . . . . . . : 00-25-90-27-B0-64
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::ed34:c142:f3de:bf0d%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.243(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 234890640
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-DC-7A-73-00-25-90-27-B0-64
DNS Servers . . . . . . . . . . . : 192.168.0.176
192.168.0.193
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection #2
Physical Address. . . . . . . . . : 00-25-90-27-B0-65
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.99.254(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 192.168.0.176
192.168.0.193
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet 1 hangt via een switch aan een Linux gateway waar alle benodigde poorten open staan (naar buiten staat helemaal niets dicht!) en de server een extern, direct ip adres toegewezen heeft gekregen. De firewall checker gaf geen problemen aan.
Stun is disabled en public ip en interne netwerk kaar 1 is geselecteerd.

Iemand een suggestie?


Top
 Profile  
 
 Post subject: Re: Problemen met bellen
PostPosted: Tue Oct 18, 2011 1:15 pm 
Offline
New User

Joined: Tue Oct 18, 2011 11:43 am
Posts: 7
Update van mijn kant. Het lijkt er op dat er een route niet helemaal lekker stond. Internet op de machine was ook traag...
Reden temeer om even verder te zoeken.

Ik kwam onderstaande tegen: (http://serverfault.com/questions/46498/two-nic-cards-with-the-same-metric-internet-traffic-going-out-the-wrong-one)
Code:
Heres how to fix it..

Open up a command prompt and type 'route print', you can then verfiy the 'metric' for each subnet your running, look at the lines where the Netmask shows as 0.0.0.0, take a note of the metrics, the wired network will most likely be '20' and the wireless '25', note: the lower value tells your computer to use to use that subnet over the other, certainly in the case of web browsing.

Go ... Start menu > Control Panel > Network Connections > Open the Properties of the non-internet network > under the 'general' tab and from within the 'This connection uses the following items' list, select 'Internet Protocol (TCIP/IP)' and click the 'Properites' button > From under the 'General' tab click the 'Advanced' button > under the 'IP Settings' tab untick the 'Automatic metric' box and input into the 'Interface Metric:' field the higher of the two values collected from the 'route print' command.

Repeat again for the internet enabled subnet, but this time entering the lower value, you can then verify the settings by going back and running the 'route print' command again


We hebben in eerste instantie de metrics waarden van de 2e nic gezet op 300 en van de eerste nic op 200. Internet was nu sneller, maar de route gaf nog steeds aan dat op alle ethernet devices gekeken moest worden bij verkeer. We hebben de route die kijkt naar alle nics verwijderd ("route delete 0.0.0.0") en opnieuw de default gateway ingevoerd onder de nic eigenschappen van nic 1.

Alles lijkt nu beter te werken... we gaan het even afwachten :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group