We've made great strides with 3CX Phone System 12, continually setting new standards within the PBX industry by providing key mobility and Unified Communications features. Following up from valuable feedback we've received from our customers,
Mature e-works technology allows 3CX to launch an innovative, tried and tested web conferencing solution in the next few months LONDON UK and MODENA, ITALY, 15 OCTOBER 2013 – 3CX, developer of the award-winning Windows VoIP PBX 3CX Phone System,
Advanced call center features, number to name conversion via Exchange integration, cross-office presence and advanced call reporting at a fraction of the costs of traditional PBXs LONDON UK, 25 SEPTEMBER 2013 – 3CX, developer of the award-winning
Heres how to fix it..
Open up a command prompt and type 'route print', you can then verfiy the 'metric' for each subnet your running, look at the lines where the Netmask shows as 0.0.0.0, take a note of the metrics, the wired network will most likely be '20' and the wireless '25', note: the lower value tells your computer to use to use that subnet over the other, certainly in the case of web browsing.
Go ... Start menu > Control Panel > Network Connections > Open the Properties of the non-internet network > under the 'general' tab and from within the 'This connection uses the following items' list, select 'Internet Protocol (TCIP/IP)' and click the 'Properites' button > From under the 'General' tab click the 'Advanced' button > under the 'IP Settings' tab untick the 'Automatic metric' box and input into the 'Interface Metric:' field the higher of the two values collected from the 'route print' command.
Repeat again for the internet enabled subnet, but this time entering the lower value, you can then verify the settings by going back and running the 'route print' command again
Users browsing this forum: No registered users and 0 guests