[mahe23]

I have just installed the provisioning file.

But still my central phonebook is not visible in the T38G.

Any comments?

Matthias

[nickybrg]

These Yealink phones have not yet met the standards required for 3CX Interoperability.

If you want 3CX to quickly and officially support these phones, please send all your complaints and requests to Yealink Support.

They know what they need to do. One of the features that is stopping 3CX from supporting T3X phones is Plug and Play. This is still not available.

[danhriscanu]

Hi,

Yealink have officially released a firmware version (Version number x.0.0.115) that supports plug and play provisioning. http://www.yealink.com/index.php/Support/
3CX has released provisioning templates for the T32 and T38 yealink IP Color Phones that can be downloaded from 3CX Online Updates. In order to do this, please open Management Console, go to 3CX Phone System Updates, open Phone Provisioning Updates and you should see a new Yealink T3X update available for Yealink Phone Models T32, 38 Color Display Phones. Select it and download it to your PBX. Once you do this you can fully enjoy all the functionalities of Yealink T32, T38 Phones.

You might also be interested in how to trigger calls using HTTP to these models of phones and how to autoprovision and manually configure these phones. You will find all the information you need on the following links:
http://www.3cx.com/blog/docs/call-setup-snom/
http://www.3cx.com/sip-phones/Yealink-IP-phone.html
http://www.3cx.com/sip-phones/Yealink.html

[Ian Joyce]

Finally here!

http://www.3cx.com/sip-phones/Yealink-IP-phone.html

3CX officially supports the T38 and T32!

[paul1]

I have noticed that my template forces the phone to ignore the user's ring tone settings.

Here are some changes I would make to the template. (Nate - I think you have the same settings.)

This line is just under the Account section and should be changed as follows:
RingTone.RingType = ring1.wav ----< Change to:>---- RingTone.RingType = common

This line is in the PhoneSetting section:
PhoneSetting.Ringtype = Ring1.wav ----< Change to:>---- #PhoneSetting.Ringtype = Ring1.wav

After these changes ring tones should work as expected.

Dan - It looks like the adjustments I made to my template did not get applied to the official version. Without these changes users will not be able to customize their ring tones.

[danhriscanu]

Hi @paul1,

Can you send us your template, please? We did tests with the latest firmware of the phone and it didn't work. From our tests, the ringer always played the same ringer.

[paul1]

Hi Dan,

Here is my template. I have made a few updates from the original one I posted last June. This one has the changes to allow the user selected ring tone to work properly. I also added the rest of the BLF buttons for one EXP39 expansion module.

Thanks for your help!
Paul

[kylejoe1]

Hi Dan,

Here is my template. I have made a few updates from the original one I posted last June. This one has the changes to allow the user selected ring tone to work properly. I also added the rest of the BLF buttons for one EXP39 expansion module.

Thanks for your help!
Paul

Do you have the DialNow feature working for this template? I want to program, XXX, XXXX, XXXXXXXXXX, etc.... to dial without pushing SEND. T-26P template allows this.

[paul1]

No. My template does not deal with the dial plan at all.

Sorry.

[netswork]

I am testing a t38 phone. One thing I would like to change in the provisioning is the ability to customize the line buttons for something other than the users line over and over for 6 times. I would like to see perhaps the first two lines as the users extension then the other 4 for things such as speed dials, BLFS or whatever.

Also is there any way to remove the broadsoft section out the directories?

[kylejoe1]

I am testing a t38 phone. One thing I would like to change in the provisioning is the ability to customize the line buttons for something other than the users line over and over for 6 times. I would like to see perhaps the first two lines as the users extension then the other 4 for things such as speed dials, BLFS or whatever.

Also is there any way to remove the broadsoft section out the directories?

As far as your 1st question:

I programmed my test t38 line 6 button to do recording, see this thread:

yealink-t38-and-the-3cx-provisioning-options-22716.html

[netswork]

Thanks for the response. With the Cisco 525's without the 500's expansion module the first 2 lines are the extension and the next 3 are customizable via the provisioning section. When you add the 500's then the 5 lines become the extension and the first blf is on the expansion module. Doesn't make much sense to me...who needs to handle 10 calls at once. Since you can take 2 calls per line button on the 525's. I did notice that the second call on the t38's come into the second button rather than multiple calls on the same button.

It seems like a language translation issue but I don't like that rather than "end call" or "end" or "hangup"...the soft key says "cancel" to drop the call. Perhaps there is a way to change that in the template also. I want to use these phones but having a hard time with some little things like "cancel" and the embedded broadsoft stuff. The paper button labels are also a mess.

I love the fact the t38's have gig ethernet ports. Even though the switch port on the back is labeled "internet" haha. I also really like the fact that they support the electronic handset lifter.

Is it possible to remove that little android looking picture that comes up when you receive or place a call?

[netswork]

I contacted Yealink about the label situation and they sent me this link.

http://labels.desi.com/product-exec/pro ... P_SIP_T26P

[DJHiP]

Has anyone managed to provision the wallpaper/background yet?

I have BLFs, Line Keys as Park keys, Theme Setting, Line Display Name all working perfectly... I just can't seem to provision or change the wallpaper...

It's a 'Logo' on the T2x phones, but the T38 on the web interface it lists as a 'Wallpaper', but when you hover over the question mark it states its a 'background'.

The only setting I can find that is close to that in the config is "PhoneSetting.BackGrounds"

It has no setting to begin with, setting it to 0, 1 or pictures (02).png does nothing..

Hopefully someone has worked it out

[netswork]

I would like to know how to do this as well. I wouldn't mind doing it manually but when you reprovision the phone it puts the default back. I know when you manually modify the wall paper on the Cisco spa phones and reprovision the background stays. I have not been able to get the background on those phones set with the provision file either.