 |
 |
 |
 |
 |
|
 |
 |
|
 |
3CX Phone System for Windows System for Windows
Page 16
mail server name and reply to address. These settings are used to send email
notifications to users of new voice mail.
4.
Set-up will prompt you for the FQDN of 3CX Phone System. IP phones contact the
phone system server using an IP OR an FQDN. If using an FQDN, then you must
specify the FQDN of the server. This value is not relevant if you specify the IP of the
server in the phone configuration. For more information, see
5.
Click ‘Install” to start the installation of 3CX Phone System.
Setup will now copy all
files and install the necessary Windows services. Click ‘Finish’ when ready.
After Set-up has completed, you can connect to the 3CX Phone System Management
Console by clicking on the management console short cut in the 3CX Phone System
program group.
To connect to the management console from a remote machine, start a web browser and
enter the name of the machine on which 3CX Phone System is installed, followed by port
5481. (For example: http://phone-system:5481)
Note: If running Windows XP Service Pack 2 with Windows Firewall enabled, after
installation, Windows XP will request confirmation to continue blocking “Apache HTTP
Server” and “3CX PBX server”. Click the “Unblock” button on these dialogs!
Activating 3CX Phone System
If you have purchased a Small Business, Pro or Enterprise version then you can activate
your license by going to the General > Activate License page in the 3CX Management
Console.