 |
 |
 |
 |
 |
|
 |
 |
|
 |
3CX Phone System for Windows System for Windows
Page 33
Route: If the line/port will receive inbound calls, you can specify to which extension, ring
group or digital receptionist a call must be routed. You can specify a different option
depending on whether the call is received inside or outside office hours.
If your gateway supports T38 faxes, you can have fax calls automatically routed to the
inbuilt T38 Fax server service. This will receive the fax and forward it as a PDF
attachment to the email address of a particular extension. Select the extension to have it
sent to the email address of that extension. If you select Default virtual fax number, the
fax will be sent to the email address configured for the virtual fax extension number (this
can be configured in General > general settings)
7.
When done click finish to create the lines.
You can change line options of lines that
have been created by going to the Lines > Manage page.
8.
On the next page, you will be asked for a prefix so as to create an outbound rule for
this device. Tick the “Create outbound rule” check box and enter the dialling prefix in
the “With prefix” text box. To make calls via this provider, precede the number to be
dialled with this prefix.
Screenshot 10 - 3CX Phone System server status
Step 2: Configure the VoIP gateway
After you have created the PSTN Lines/ports, a summary page will appear, which shows
the information that you need to enter into the VOIP Gateway:
Proxy server IP or FQDN: Host name of 3CX Phone System