 |
 |
 |
 |
 |
|
 |
 |
|
 |
3CX Phone System for Windows System for Windows
Page 7
2. In the Connection Settings dialog, click on the ‘Out of Office’ connection and specify
the internal IP of 3CX Phone System on the right hand side. If in doubt, contact your
administrator.
3. In the section ‘Authentication’, select ‘3CX Phone System’ and enter your extension
number and pin code.
4. Click on the tab ‘Tunnel’. Tick the option ‘Use 3CX tunnel’, then specify the public IP
and port of the 3CX Phone System in the field “Remote end of Tunnel’.
5. Click Connect to check that the tunnel is working
6. Click on the Save button to exit the dialog. You can rename the profile by right-clicking
on the profile and give it a different name.
To switch to ‘Outside the office mode’ from within the phone, select ‘Action > Connection
> Out side the office’ from the menu. The connection will be re-established with the new
connection settings.
Note: If you wish to use a 3CX Tunnel installed on a different host, simply enter the IP of
the host with the 3CX Tunnel service installed. In this case you must configure the
Remote end of the Tunnel on that machine.
Configuring a “direct” Out of Office connection
If you want to create an Out of Office connection that does NOT use a 3CX Tunnel, then
configure the connection profile as follows:
1. Select File > Connections from the menu
Screenshot 3–Creating an Out of the Office Connection