Enter Provisioning URL via the Grandstream GXP web interface -3CX
pixel500w-500x1
Zero Admin
With the new Dashboard
pixel500w-500x1
Bulletproof Security
With SSL certs and NGINX
pixel500w-500x1
Install on $100 Appliance
Intel MiniPC architecture
pixel500w-500x1
New, Intuitive Windows Client
More themes, more UC
pixel500w-500x1
More CRM Integrations
Scripting Interface to add your own
pixel500w-500x1
Improved Integrated Web Conferencing
iOS and Android apps included
pixel500w-500x1
Personal Click2Meet URLs

Enter Provisioning URL via the Grandstream GXP web interface

Enter Provisioning URL via the Grandstream GXP web interface

GXP2110_faceView.jpg

Supported Models: Grandstream GXP 1160, 1165, 1400, 1405, 1450, 2100, 2110, 2120, 2124

Ideally you will have the Grandstream GXP phones pick up the HTTP server information using the PnP provisioning method. If this is not possible, then you can enter the information manually in the web UI of the phone using the procedure outlined below:

Enter Provisioning URL via the Grandstream GXP web interface

Supported Models: Grandstream GXP 1160, 1165, 1400, 1405, 1450, 2100, 2110, 2120, 2124

Configuring the provisioning server via the Grandstream GXP series web interface

Step 1: Configure the phone in 3CX

Step 2: Enter the Information into the Web Interface of the device

See also

For a complete step by step guide to provisioning the Grandstream GXP phones for use with 3CX see the general configuration guide of Provisioning of Grandstream GXP Series.”

Note: This guide was tested with the Grandstream GXP firmware listed in the main provisioning guide. Other firmware versions might not have this functionality and will not be tested.

Configuring the provisioning server via the Grandstream GXP series web interface

Step 1: Configure the phone in 3CX

  1. Log in to your 3CX Management Console  Phones  press “Add Phone.”

  1. Pick an extension from the list to which the IP phone shall be assigned.

  1. Select the model and enter the MAC address of the device which can be found on the back of the device itself.

  1. Optional set the “Phone Display Language” and “Timezone” for the device.

  1. Take a copy of the “Provisioning Link” which needs to be entered into the Grandstream GXP in step 2.

Step 2: Enter the Information into the Web Interface of the device

  1. Open the Web Interface of the Grandstream phone and login (default password is admin).
  2. Navigate to “Maintenance”  “Upgrade and Provisioning.”
  3. Set the “Upgrade via” to HTTP.
  4. In “Configuration Server Path”and “Firmware Server Path” enter the provisioning link taken from step 1 and paste in without http://” 
    (example:
    pbx.mybusiness.local/provisioning/pc56bscs195k)
  5. Press “Save and Apply” and “Reboot” which can be found in the top right corner of the Grandstream web interface.

See also

You might also be interested in:

<