Manually Setup a Polycom SoundStation 5000, 6000, 7000 for 3CX
pixel500w-500x1
Zero Admin
With the new Dashboard
pixel500w-500x1
Bulletproof Security
With SSL certs and NGINX
pixel500w-500x1
Install on $150 Appliance
Intel MiniPC architecture
pixel500w-500x1
New, Intuitive Windows Client
More themes, more UC
pixel500w-500x1
More CRM Integrations
Scripting Interface to add your own
pixel500w-500x1
Improved Integrated Web Conferencing
iOS and Android apps included
pixel500w-500x1
Personal Click2Meet URLs

Manually Configuring a Polycom SoundStation for 3CX Phone System

Enter Provisioning URL via the Polycom web interface

All-Series.jpg

Supported Models

  • Polycom SoundPoint 321, 331, 335, 450, 550, 560, 650, 670
  • Polycom SoundStation 5000, 6000, 7000
  • Polycom VVX 101, 201, 300, 301, 311, 400, 401, 410, 411, 500, 501, 600, 601

Ideally you will have the Polycom SoundPoint or SoundStation phones pick up the HTTP server information using a DHCP Server with configurable Option 66. If this is not possible, you can enter the information manually in the web UI of the phone using the procedure outlined below:

Enter Provisioning URL via the Polycom web interface

Supported Models

Configuring the provisioning server via the Polycom web interface:

Step 1: Obtain the provisioning URL for 3CX V14

Step 1: Obtain the provisioning URL 3CX V15

Step 2: Enter the Information into the Web Interface of the device

See also

For a complete step by step guide to provision the Polycom phones for use with 3CX see the general configuration guide of Provisioning Polycom 321,331,335,450,550,560,650 & 670 or Provisioning Polycom 5000, 6000 & 7000 or Provisioning Polycom VVX

Note: This guide was tested with the Polycom firmware listed in the main provisioning guide. Other firmware versions might not have this functionality and will not be tested.

Configuring the provisioning server via the Polycom web interface:

Step 1: Obtain the provisioning URL

  1. Open the extension where the phone was provisioned to and take a copy of the provisioning URL:


Step 2: Enter the Information into the Web Interface of the device

  1. Open the Web Interface of the Polycom device and “Login As Admin” (default password is 456).
  2. Navigate to “Settings” -> “Provisioning Server.”
  3. Set “Server Type” to HTTP.
  4. In “Server Address” enter the provisioning URL taken in step 1.
  5. Clear the fields of “Server User” and ‘‘Server Password.”
  6. Press “Save” in the bottom of the page and confirm the changes.

See also

You might also be interested in:

<