• V20: 3CX Re-engineered. Get V20 for increased security, better call management, a new admin console and Windows softphone. Learn More.

Search results

  1. Elastix 3.0

    Has anybody gotten 3.0 configured...I am using 2.4 and wanted to try 3.0 . I can configure a trunk and successfully register, and successfully configure an extension. However if I try to place an outbound call (using a very generic outbound rule) I get an "all circuits are busy error and...
  2. Elastix 3.0

    I don't think I am dense...but I have been trying to install Elastix 3.0 and cannot see extension properties at all. I have installed an organization, and a user, but the extension list, the one extension I have created with user, but I can see no way to get to the properties....any ideas out...
  3. Polycom Phone Default Gateway.....

    Thanks for thoughts. You are right I have two nic's one to LAN and one to WAN (with Public IP). I have the WAN card configured as 0.0.0.0 mask 0.0.0.0 gateway to XXX.XXX.XXX.XXX (my default router on the Public side). The LAN card is configured with 10.0.2.X mask 255.25.255.0 with no default...
  4. Polycom Phone Default Gateway.....

    I have another weird problem...I just can't help but finding them..... I have a several Polycom 500/501. My 3CX server is multihomed. Real IP Address to the internet, and a 10.X.X.x series of address for internal. If I set the default gateway (0.0.0.0) to the internet facing card, and then...
  5. 3CXPhone in Samsung Galaxy Lite - Spica - I5700L

    I had the same issue with dialing on an HTC incredible, but only on a reinstall of the app. The solution was painfully obvious, but it took me a quite a while to find it.......I needed to enable telephone to make 3G calls. With 3CX running in window: Press Menu, Profiles and select profile...
  6. GXP-2000 BLF

    I thought I would update this post as of 11.30.10. I upgraded the firmware on the 57i to the latest version and all issues appeared to end, and the Polycom extensions reort busy, rining, etc on the 57i after the firware upgrade.
  7. 3CX Outbound Fax Server Driver (3CXfaxserver.msi)

    Yes, I have several outbound providers and all indicate that they support T38.
  8. 3CX Outbound Fax Server Driver (3CXfaxserver.msi)

    Yes. Actually I have about 4 outbound providers, some support and some don't (or at least not well from what I have seen on net). Any rate I outsmarted myself and reinstalled everything, and now I am back to having inbound only. I use, principally BroadVox and TalkinIP for outbound calls...
  9. 3CX Outbound Fax Server Driver (3CXfaxserver.msi)

    Thanks for the idea. I looked around for that not realizing that it is on the server install. Any rate I installed that (3CXfaxserver.msi) and it works like a champ, but only to known VoIP faxes. I can send a fax from one line outbound into my inbound 3CX server and it appears to come through...
  10. 3CX Outbound Fax Server Driver (3CXfaxserver.msi)

    Any chance, Chavous, you could post the set up parameters you used to get the FaxVoIP client working. I have tried it and can get it 1) register and 2) dial out. When dialing out, it gets a "hard answer" (line answer) at the other end and then fails negoiate a transmission. On dial in it...
  11. Droid X 3CX locks up the phone

    Does anyboody know if the same issue(i.e. lockingupthe telephone) is involved in the Verizon/Motorola "Droid 2"or is the buglimited to the Droid X only?
  12. How to configure aastra phone working from remote site

    What are the symptons of "not working". Not registering? One way audio?
  13. Conference Call CUts off when using PIN

    Odd problem...on V9, I can create a conference and all works apparently well, just as V8. However, if I add the PIN number feature the call cuts off immediately. I tried from a Polycom (501), Aastra (57i and 53i), and a couple of Grandstreams as well. Also tried to delete the local dialing...
  14. FORCE UDP Transport

    Thanks all. I am being told by the provider that traffic is coming in TCP, thus the question.
  15. FORCE UDP Transport

    Actually I am trying to force traffic to one provider to be transported UDP....Any ideas.
  16. FORCE UDP Transport

    One of my provders mydivert.com has shut off TCP transport, seems they have a bug causing issues. They advise using UDP transport, problem is I do not see any seetings that force UDP. In fact I look at my logs and it appears some traffic is coming in UDP, not TCP, but they swear I am coming in...
  17. Unable to recieve faxes

    I was pulling my hair out (what is left of it) trying to get an analog fax server and fax machine to work through my 3CX server with a Grandstream GXW-4008 ATA. Tried every setting in the book to no avail. Call would dial, attempt to negotiate speed for a second or two and then go to a busy...
  18. GXP-2000 BLF

    I am using 3CX commerical edition and have a problem that has me at a loss. I have several different brand phones on the system but I am using a Aastra 57i for a receptionist station with a 560M sidecar. Any GXP-2000 (there are three) on the system always shows as being busy on the BLF fields...
  19. DTMF to extension

    I had this working with an analog PBX before. No the DTMF does not replace caller it is designend to replace "Called ID." On the old analog sysytem (Televantage) it would listen for the fax server to answer, and then in a few seconds (or less) it would play the DID number of the called number...
  20. DTMF to extension

    I am trying to send DTMF tones to a certain extension. Here is the "set up" I have a 3CX PBX (has both SIP trunks and POtS trunks) which has regular extensions (i.e. SIP telephones), I also have ATA s(Grandstream 4004 & 4008) that pass telephone calls to POTS phones, including a ZetaFax Sever...
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.