• V20: 3CX Re-engineered. Get V20 for increased security, better call management, a new admin console and Windows softphone. Learn More.

Search results

  1. Call stays connected after accepting rebound

    Well, it looks like the upgrade to version 12 solved my issue... It now disconnects immediately after hanging up on the mobile. The last thing I haven't sorted out is - when the call is transferred to my extension using rebound, the other party hears "Please wait while we locate <extension...
  2. Call stays connected after accepting rebound

    I was running version 11 (thought I had upgraded to 12). I've upgraded to 12 today and will test. I did try calling back in on that line and 3cx warned me my license was exceeded the maximum number of calls (free version =2). So, it definitely is holding that line open. I'll test this with V.12...
  3. Call stays connected after accepting rebound

    I wondered the same thing but thought maybe it was just "normal activity". During a rebound call it actually shows one "idle", another "IN" and the one you see there, "OUT". Is this perhaps because you can have multiple VoIP calls over the same line, at the same time? As I mentioned earlier...
  4. Call stays connected after accepting rebound

    Further to my previous post; attached is a snapshot of the call staying connected even after I've ended the call. I've also tried toggling "Supports Reinvite" on the provider. No change.
  5. Call stays connected after accepting rebound

    I'm using voip.ms as my provider. Everything else seems to be working correctly. Below is a copy of the server log during the call. IP addresses and numbers have been xxxx to protect privacy. The extension "109" is a member of a call group. I've tried changing the incoming rules to dial the...
  6. Call stays connected after accepting rebound

    I'm having an issue whereby after accepting a call using the Rebound feature when transferring to my mobile phone, the line stays connected in 3CX. I have to manually disconnect the line in the management console. Is there anything else that needs configuring to have the line disconnect after...
  7. v10 Voicemail Issues

    Yes, that's correct. I will put the system in verbose mode. Hopefully, I can replicate the problem in a short amount of time and post the results. For whatever reason, I can't seem to make this error happen myself. I can leave messages after messages and things work fine (internally and...
  8. v10 Voicemail Issues

    I'm having an issue whereby voicemails are not always being saved. Callers have said that they've left messages and sometimes I get them and other times I don't. My setup is as follows: 3CX v10 VMWare ESXi (2 GB, 1 virtual proc.) Server 2008 R2 x64 Abyss Web Server Everything else is working...
  9. One way audio with Iphone 3G connection

    I had this problem as well. For those who are experiencing one-way audio over 3G you can try asking your provider to enable VPN access (might be a small monthly charge). Then you will need to modify the APN settings on the iPhone (there are guides on the internet on how to do this). The big...
  10. Strange Hyper V Issue

    Great feedback! I've been away on business and just now have been able to read the posts. The RTC timing sounds like it could be the culprit! It could certainly explain why some people have had absolutely zero problems with the exact same setup and why my Server 2003 worked as well as it did...
  11. Strange Hyper V Issue

    This is great feedback! Thanks everyone. It's ironic that you mentioned Voip.ms since they're the provider I'm using. Oddly enough, I don't suspect them as being the direct problem as I had no issues while I was running my Server 2003 virtual. I've tried running Server 2003 (32 Bit) and...
  12. Strange Hyper V Issue

    I am using Server 2008R2 so there are no PM timers. My 2003 Server is the one that sounds good and works well. Go figure. Thanks for the suggestion though. I am in the process of migrating all of my servers over to ESXi. It's too bad because I did like Hyper-V, but the more I get into the...
  13. Strange Hyper V Issue

    I believe I'm getting closer to narrowing this down. Today, I put together a small Openfiler iSCSI Host and configured the exact same problematic Server 2008R2 virtual to run off VMware ESXi (vSphere) and it ran fine. So, it seems as if this is definetely a Hyper-V configuration/driver issue...
  14. Strange Hyper V Issue

    Thanks for all the suggestions. Yes, the audio service is running (on both just to be sure). Today, I removed EVERYTHING on my network and connected the router, server and another PC (running 3CX Phone for testing) via a Gigabit switch. Still, the problem persists. It really doesn't make...
  15. Strange Hyper V Issue

    I can play a .wav file on the host machine with no problems but I can't enable the sound device on the virtual 2008R2 machine. My understanding is sound devices can't be passed through to virtual machines. Is this correct? If they can, how do I enable this? The integrated services option doesn't...
  16. Strange Hyper V Issue

    Well, I have given up... I installed a sound card, reinstalled Server2008 (virtual machine) and 3CX and the problem persists. I even tried taking the physical machine below and converting it into a virtual for kicks. Nothing seems to fix this issue and I don't want to run my PBX on an outdated...
  17. Strange Hyper V Issue

    Update -- abc123, I think you could be on to something. I enabled RDP Audio passthrough on the problematic Server 2008R2 virtual machine and when I log into the machine via RDP you can see that the volume icon doesn't have the red "x" through it (i.e. RDP default audio device). Now, while I am...
  18. Strange Hyper V Issue

    Thanks for the suggestions. Unfortunately, the issue persists. I am not running any anti-virus software on any of these virtuals until this issue is sorted out. Today, I tried installing a fresh Windows 7 Ultimate x64 Virtual machine and assigned 2 GB to it. The exact same problem (random...
  19. Strange Hyper V Issue

    I have been evaluating 3CX Version 9 for a couple of weeks now and absolutely love it! This is my first 3CX install so please bear with me :P My setup is as follows: XEON E5520 with 8GB Ram Server 2008R2 running Hyper-V on LSI Raid 1 2 TB on dedicated LSI controller in Raid 10 (4 Sata...
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.