• V20: 3CX Re-engineered. Get V20 for increased security, better call management, a new admin console and Windows softphone. Learn More.

Search results

  1. [CM506004]: STUN request to STUN server 75.101.138.128:3478

    Apparently both stun.3cx.com and stun.xten.com resolve to the same ip. Looks like the backup stun server is never even tried. I had to use stun.ekiga.net to get things up.
  2. TAPI Not working in 64bit Vista

    Hello All, I trying to use the latest VOIP client and it seems to be ok but the TAPI interface does not appear to be working. I had this working on 32bit Vista, is there an issue with 64 bit Vista or should I look at something else?
  3. Anyone have phones successfully working Remotely?

    We have two remote sites set up with Sonicwalls and site-to-site VPNs working with no problems at all using Linksys SPA962 phones. I've also tested with a Linksys IP330 wireless phone and a few different softphones with no problems. The VPN eliminates NAT which is where most if not all the...
  4. Anyone have phones successfully working Remotely?

    I've heard that Polycom's do not work well with NAT. That said, we, like Matt, use site to site VPNs to eliminate the issue.
  5. VM Tip

    With the ability to transfer a call directly to VM also comes the ability to leave a co-worker a VM without having to ring their extension. Just dial *4 and the extension and you will get their VM. Makes sense when you think about how it works with a blind transfer. There a a few times when...
  6. Sonicwall TZ170 - Warning (10) on firewall test.

    So far, ok. I have some delay issues, but much better than before. Just installed V6 final and can't get a Grandstream phone to provision.
  7. Sonicwall TZ170 - Warning (10) on firewall test.

    I've found the issue can be avoided by using multiple IP addresses. I've set up 3 sites so far, two with TZ-170's, one with a TZ-180. Both Enhanced and standard OS. The key is to get a block of IPs from the ISP. Do NOT use the base IP for the Sonicwall for the 3cx, give it it's own IP. Port...
  8. V6 feedback, some problems

    I installed V6 yesterday. did the config upgrade from 5.1 option. On logging back in to the server after a re-boot I got a message that the pbx service crashed. I restarted it and everything seemd ok. This moring, no extension would ring another extension. I rebooted the server and the PBX...
  9. SPA942 as remote hardphone

    I tried in vain to get a 962 working like that in V5. I eventually set up a VPN between the two sites and got it working fine. Have NOT tried with 5.1, but it still works with the VPN
  10. Linksys SPA942 provisioning template

    Here's the section we added to the SPA942 template: <!--GACS Added Config options --> <Primary_NTP_Server group="System/Optional_Network_Configuration">time.windows.com</Primary_NTP_Server> <Time_Zone group="Regional/Miscellaneous">GMT-05:00</Time_Zone> <Daylight_Saving_Time_Rule...
  11. Linksys SPA942 provisioning template

    Sure, when I get back to the office.
  12. Linksys SPA942 provisioning template

    I figured it out. there is a xml file in a templates directory. This fle contains some standard settings like the extension, 3cx server ip, etc to get the phone registered but is missing some other important fields. By setting up a phone directly and then navigating to...
  13. Linksys SPA942 provisioning template

    I have auto-provisioning set up for some Linksys SPA942 phones. I found a xml file under the data directory on the 3CX server. I'm wondering, is there some way to modify this included xml file to create a standard template? I need to push the VM extension number, dial plans, time server...
  14. Cannot get Nexvortex line to work

    Hello All, after much work I managed to get the firewall test to pass clean on our Sonicwall. I thought this was my problem but I still cannot get a NexVortex voip line to work. It registers, but when trying to make an out bound call I just get a busy signal. On inbound calls it seems to...
  15. Sonicwall TZ170 - Warning (10) on firewall test.

    Matt, I feel your pain, I've been going through the same issues on a TZ-170. If you have the Enhanced OS you can created a NAT policy like so: Original Source: 3CX Private IP Translated Source: 3CX Public IP Original Destination: Any Translated Destination: Original Original Service: Any...
  16. External extension not disconnecting

    This is still a problem, even with the latest build.
  17. Unable to register voip line

    FYI, Started working again in the latest 3790 build
  18. External extension not disconnecting

    It was the latest build, I see now one was posted this week. Yes, I have to restart the services in order to get the phone reset.
  19. External extension not disconnecting

    Can anybody help with this?
  20. Unable to register voip line

    Archie, Would you be able to look into this now? It's still not working.
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.