• V20: 3CX Re-engineered. Get V20 for increased security, better call management, a new admin console and Windows softphone. Learn More.

Search results

  1. Endpoint Manager and Remote Networks?

    Does the Endpoint manager work on non-locally attached networks? I have an installation that has it's PBX centrally located in a Co Location facility and is attached via VPNs to several remote sites. The PBX has 2 interfaces. The first is attached to a Public IP address and the second is...
  2. Hot Fail-Over Server with Analog Lines

    I have a new client that is looking to create a system that has has two servers that is kept in a hot-failover configuration. We are looking at using the clustering howto with DRDB and Heartbeat, but have a question regarding analog line cards. How should this be handled so the cards don't...
  3. Integration of Aastra Scripts and Endpoint Manager

    I'm looking at what it would take to integrate the Aastra scripts with the Endpoint Manager. The primary need with these is to get the Aastra scripts to use the Endpoint managers database to identify the configured phones instead of the flat file Aastra built them with. I can integrate the...
  4. Polycom IP430 - Hiss on Handset, not on Speaker

    I have a client that purchased 10 or so used Polycom IP430 units that we hooked up to an Elastix system. About 1/2 of these have a sustained hiss on the line that sounds like frying bacon when you are on the handset. If you switch to speaker phone mode, the hiss goes away. On the phones that...
  5. Need Help with Auto Attendant with Time Condition

    Elastix 1.5.2-2.3 Rhino Ceros Chassis Dual Ethernet No additional cards When I first set this system up for these guys I had their main line setup on an inbound route that went to an extension that had a Polycom 601 phone on it. On that phone they would forward that extension to one of the two...
  6. Need help setting up Conference Manager

    using Elastix Version: 1.5.2-2.3 Stable I need some help setting up the Conference Bridge Manager. I tried following the steps in Elastix without Tears (Thanks for a great document!), but ran into a snag in the first step where it said to edit the meetme_additional.conf file and add the lines...
  7. Grandstream ATA one way audio mid-call

    I have a strange problem I need some help with. I have a client that has two extensions on a Grandstream 496 ATA at their site from us, that was previously hosted on a TrixBox box where the hardware died. So I reprovisoned them on our hosted Elastix box running version 1.3-2 with the Custom...
  8. ZAP call to Ring Group connects to next open ZAP

    I installed 1.5.2-2.3 on my home PBX and started reconfiguring to recreate what I had before the upgrade. I created a ring group with 3 extensions for my "House" phone and then created an inbound route from my 1st ZAP channel to the ring group/ When called the group rings once, then connects the...
  9. MS CRM Integration - dialer?

    I have a client that is integrating with MS CRM 4.0 and needs a good dialer integration. Can somebody suggest something that works well with Elastix that they have used in the past? The client uses Outlook 2003 and 2007 and IE 6 and IE 7, so the solution needs to be a bit flexible, although we...
  10. Display freePBX 2.4 new items - Patch available

    After using the excellent update script provided by CleveJ (in post http://www.elastix.org/index.php?option ... =1&id=7853) I went ahead and ported the 5 new features into the pbxadmin tab so you don't have to use the unembedded feePBX option. I don't know how to give this back to the...
  11. command line set of Language and Theme?

    I am building a setup script that takes a bunch of parameters and auto-configures a system and have run into a bit of a snag. Two of the things that I need to set are the Theme and the Language for the system as it is built. I looked through the code and the databases and it appeared that all I...
  12. FreePBX 2.4 - General Questions

    I'm new to this distribution, so forgive me if I am rehashing old stuff. I have gone through the forums and found what the search locates related to upgrading to FreePBX version 2.4 and have made the normdial fix. It all appears to be working, except the new features don't show up in the...
  13. Digital Receptionist announcement playback is "fuzzy&am

    Re: Digital Receptionist announcement playback is "fuzzy&am I tried doing the VM recording and it didn't make much difference. I updated to version 5 and it got better, but still fuzzes out occasionally. This is as solved as it's going to get... markh
  14. Calls to Digital Receptionist ring all phones once first

    Solved. Problem was one of misdirection and wiring and one default setting. I had more than one phone wired to the port on the Sipura 3000 so I heard multiple phones ring when a call came in, but not all of them. The ring through is controlled by a default setting in the Sipura that the 3CX...
  15. DR doesn't populate lists for extensions or ring groups

    Problem solved. I had one extension that was labeled: First Name: Mark's Last Name: Office Earlier tests that worked didn't have that extension defined. If the labels cannot have a single quote in them then the interface should check and disallow it like it does with the names for the hunt...
  16. DR doesn't populate lists for extensions or ring groups

    Found that I could force the drop downs to fill by selecting either Transfer to Ring Group or Transfer to Extension and hitting the OK button, then editing it again. This resulted in the first item in the list for either option being displayed, but now I cannot get the timeout list to populate...
  17. DR doesn't populate lists for extensions or ring groups

    More Sighs. I finished my documentation and removed the SW, then rebooted for clarity. After reinstalling and redefining my 7 extensions again, I find I have the same problem again when I try and define the DR. When I select an option that should populate the drop downs I get an error in my...
  18. DR doesn't populate lists for extensions or ring groups

    Some joy, followed by a big sigh. The problem appears to be in the backup/restore. I can properly create a new digital receptionist until I do a restore of the old configuration that I backed up. This really becomes a PITA as I had 4 different gateways that I was attempting to test configured...
  19. DR doesn't populate lists for extensions or ring groups

    OK, no joy. I uninstalled and the reinstalled directly from the 3790 download. Then restored the backup and I still get this behavior. Anybody have any other suggestions? I'll try again and see if not restoring allows me to make a DR correctly. markh
  20. DR doesn't populate lists for extensions or ring groups

    The 3970 install was done as an update from 3752, but the 3752 was a clean install. The original install had the same problem which was why I did the update. I'll try and reinstall and see what happens
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.