• V20: 3CX Re-engineered. Get V20 for increased security, better call management, a new admin console and Windows softphone. Learn More.

Search results

  1. Indian caller ID with Linksys SDA 3102

    Ok...back again without any success though. I have contacted Linksys ppl they are yet to revert with a solution. I have found that in Voxilla forum there's a wizard for Indian setting of SPA3102. I have registered myself there, but the forum doesn't sent me any verification mail (checked the...
  2. Low volume linksys spa3102 & caller id voipbuster

    For Q2 --> open the on-hold music file in a wave editor and lower the volume and save it as another file. Use that new file as your on-hold music. Hope this helps.
  3. Indian caller ID with Linksys SDA 3102

    That's a statement which, you know well, how true is that. Let's not get into arguments. Call centers do not work with SPA3102. I'm talking about techies, who has worked on SPA3102 and am sure that there's a solution. If the SPA can detect caller-id in debug mode and it's not getting...
  4. Indian caller ID with Linksys SDA 3102

    Hi Bhavank, Is that SPA-3102? Or any other device? If any other, may I please know the brand and model name? If you're using with SPA-3102, may I please have complete model name and which firmware you are using? For which phone line are you using? MTNL, BSNL, Airtel or anything other? TIN
  5. Indian caller ID with Linksys SDA 3102

    Hi Bhavank, May I know what hardware your 3cx is working with and the telephone provider you are using? Are you using PRN or FXO? Thanks...
  6. Indian caller ID with Linksys SDA 3102

    Hi Ralph, thanks for replying. Well, when I debug (via slogsrv) SPA, I get the following : FXO-Digit: 1 FXO-Digit: 2 FXO-Digit: 3 FXO-Digit: 4 FXO-Digit: 5 FXO-Digit: 6 FXO-Digit: 7 FXO-Digit: 8 FXO-Digit: 9 (Well, I have replaced the digits with original number. In this case, I...
  7. Indian caller ID with Linksys SDA 3102

    Can't believe this.... Can't believe this that there's nobody in this forum who can really help to get indian caller id through Linksys SPA3102. India is the hub for major Call Center outsourcing for (so-called) 'major' developed country. Will any techie really wake up??? TIN.
  8. Calls Releasing After 30 - 32 Seconds

    Hi... Backup the data --> Uninstall 3cx --> Reinstall --> Restore data. This worked for me. Hope this helps...
  9. SPA-3102 problems...

    Well... I read similar problem somewhere in this forum and just followed it. It was simple. Backup data --> Uninstall --> Reinstall --> Restore Data. And the calls are now ON for minutes after minutes. ;) Hope this helps...
  10. SPA-3102 problems...

    SPA-3102 Experts! Hi... The problem still exists, disconnecting with "unknown" cause after 32 secs. Also, I'm not able to get caller id. I'm from India. Any help would be highly appreciated. TIN
  11. SPA-3102 problems...

    Hello Jay, It's the same as before... ----------- 3:12:27.984 StratInOut::onHangUp [CM104007] Call(20): Call from Ln:10000@SPA-3102 to 100 has been terminated by Ln:10000@SPA-3102; cause: unknown 13:12:22.218 MediaServerReporting::DTMFhandler [MS211000] Call(20)...
  12. SPA-3102 problems...

    Thanks, Jay. I have found the correct disconnect tone for India (MTNL) : 400@-10,400@-10;10(.75/.75/1+2) There are few other settings that I found which are working for MTNL, India for SPA-3102. In Regional Tab: Dial tone : 400@-10,375@-10;10(*/0/1+2) Busy tone ...
  13. SPA-3102 problems...

    Hi... Bought SPA-3102 yesterday, but having following problems: 1. After getting connected to Digital Receptionist, after a few secs, it gets disconnected. Log as below: ------------------ 06:46:51.765 StratInOut::onHangUp [CM104007] Call(8): Call from Ln:10000@SPA-3102 to 100...
  14. Not able to register...

    Hi again... I sorted out by just uninstalling v.5 and installing v3. It's working now. Thanks.
  15. Not able to register...

    Thanks AldoLinares... Today I find that the PBX is in RED which says "PBX server is not running". There's no firewall etc. Earlier I was seeing logs stating only registering Fax service, though I had not enabled any fax service. Now the server status page is blank (no reports). Please...
  16. Not able to register...

    Hi... Was my question not worth a reply? :roll:
  17. Not able to register...

    Hello, I have downloaded 3cx (free version). No gateway and PSTN lines configured. As the home page after login in to the webpanel says: 1. Create or Import extensions for your phone system. Each user will have an extension. 2. After you have configured 2 extensions, try calling the...
  18. So, I'm going for it...

    Yes, Got It, Mori :D Will post back, once I set-up everything. Thanks a billion. :D
  19. So, I'm going for it...

    Hello Mori, Thanks for your reply. I now understand that the caller can directly dial an extension number and it'll go to the extension. In my above example, it goes to extn. 20001, which going to record voice mail. Now, how the user of extension 20001 can retrieve voice mails recorded...
  20. Retrieve voice mails

    Oops...sorry, instead of replying to my previous msg, i clicked on new post. Sorry Admins, you may delete this post.
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.