• V20: 3CX Re-engineered. Get V20 for increased security, better call management, a new admin console and Windows softphone. Learn More.

Search results

  1. Distinctive Ring Tone

    So, there's still no real "official" support for distinctive ring then. I have a client that was on 3CX (v10) a while back, but moved to a hosted PBX and one of the reasons was the lack of distinctive ring support. For various reasons, now they're looking at going back to 3CX, but still want to...
  2. how to configure Voice VLAN on GS724TPS

    @jpillow Yes, it does, and I've already added the Grandstream MAC octets to the OUI. But, as I mentioned in my original post, when you enable that feature, there's a dropdown box to select which VLAN to use. If I create a new VLAN3 for just the phones, I have no DHCP server on VLAN3 and 3CX is...
  3. how to configure Voice VLAN on GS724TPS

    Looks like the config file that 3CX generates for the SN4114 is incorrect. See my post at the bottom of this thread: http://www.3cx.com/forums/patton-4114-config-issue-29770.html#p138610 I'm going to switch it to auto and see if that makes a difference.
  4. v10 SP6 back to SP5 Possible?

    Hey Les, I think I know why your SN4114 went to 10 half duplex. See my post at the bottom of this thread: http://www.3cx.com/forums/patton-4114-config-issue-29770.html#p138610 PS: nice to see a fellow Canadian SBS guy in here.
  5. Patton 4114 Config Issue

    I've just came across your post as I was trying to figure out why the Ethernet port on my Patton gateway (SN4114) was defaulted to 10 MBps half duplex. Digging a little deeper after reading this thread, I found that my config file generated by 3CX has the same section as yours: port ethernet 0...
  6. how to configure Voice VLAN on GS724TPS

    Actually, I ran separate drops for data and voice, so the computers are not connected to the phones. They're connected directly to the CAT6 wall jacks, so they're taking full advantage of the gigabit LAN. The slowest thing on the network is the Patton gateway (SN4114). I just checked its...
  7. how to configure Voice VLAN on GS724TPS

    Thanks for the response. VLAN2 (and the 9 devices that are part of it) is for a classroom of computers, and was setup that way to isolate them from the office LAN. So those are not the phones. There are actually 12 phones in the office. Currently, they are all part of the default LAN. There...
  8. how to configure Voice VLAN on GS724TPS

    I have 2 stacked GS724TPS Smart Switches. Ports 2/g15 - 2/g23 are configured to VLAN2 (192.168.2.0/24), while all other ports are part of the Default VLAN1 (192.168.0.0/24). The firewall appliance has a LAN port setup for each LAN and serves DHCP to each in their appropriate subnet. Both subnets...
  9. Anyone using Grandstream GXP-2124

    The Grandstream GXP-2124 is not listed under supported hardware. Is anyone using these phones? And if so, how easy are they to configure?
  10. Remote extension in different time zone

    I think the phones load their config everytime they're booted, so changes made using the phones web interface just get over written.
  11. Remote extension in different time zone

    Since time and time zones are set under Settings - Phone Provisioning - General, they apply to all phones. What do I do if I have a remote extension that's in a different time zone?
  12. blocked from voice mail

    I have a user reporting that he is blocked from his voice mail after too many unsuccessful attempts (using wrong PIN). He says he remembers his correct PIN now. Is there a way to reset his voice mail to allow him access? Or does it reset automatically after a period of time? How long?
  13. Wireless headset for GXP-2110

    I've got a client who's currently using Grandstream GXP-2110 phones and their previous Plantronics CS55 headsets. If I plug the headset into the headset jack of the phone, the headset button just toggles the headset for an existing call, but does not answer/end calls. So for an existing call...
  14. 3CX going into trial mode after reboot

    Looks like this issue was resolved by the demotion and removal of the old SBS 2003 server from the network.
  15. Using alert-info to set ringtone

    That's worth a try, thanks.
  16. Using alert-info to set ringtone

    I think I understand why this isn't working. I logon to the GXP-2110's web interface and change "Custom ring tone 1" to "internal", save and reboot. However, on reboot, the phone loads its settings from the provisioning file from 3CX and overrides my changes. When I logon to the web interface...
  17. Wireless headset for GXP-2110

    I've got a client who's currently using Grandstream GXP-2110 phones and their previous Plantronics CS55 headsets. If I plug the headset into the headset jack of the phone, the headset button just toggles the headset for an existing call, but does not answer/end calls. So for an existing call...
  18. Using alert-info to set ringtone

    So no one has this working?
  19. Using alert-info to set ringtone

    Does anyone have dual ring tones working for internal vs external calls on Grandstream? The user manual has the following section: Distinctive Ring Tone Select a Distinctive Ring Tone 1 through 3 for the caller ID. The Caller ID can be configured as a particular caller ID or Alert-Info text...
  20. 3CX going into trial mode after reboot

    The problem occurred again last week following a reboot. However, last night, I demoted and removed the old SBS 2003 server from the network and cleaned up DNS, etc. After rebooting the SBS 2001 Essentials server (where 3CX is installed), I checked 3CX and this time the Activate screen actually...
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.