*20* LinkSYS SPA3102

Discussion in '3CX Phone System - General' started by galal202, Jul 5, 2008.

Thread Status:
Not open for further replies.
  1. galal202

    galal202 New Member

    Joined:
    Jun 23, 2008
    Messages:
    235
    Likes Received:
    0
    Hello
    pickup call *20*
    page code *9+extension
    does not work from spa3102 and spa962
    it works from grandstream 2020

    doen any one help please ?
     
  2. 5qg4

    5qg4 Active Member

    Joined:
    Jan 31, 2007
    Messages:
    643
    Likes Received:
    0
    Dial Plan setting issue at your SPA. You may try to change it by default "(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)"
    to
    "(*xx*|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)"

    or delete any unwanted setting. eg delete *xx
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. Henk

    Henk Member

    Joined:
    Nov 13, 2007
    Messages:
    250
    Likes Received:
    0
    I wrote a bit of a guide a while back.


    http://www.d-d-d.com.au/3cx/InstructionMSPA3102V2_2a.pdf


    Try that, see if it helps, if not let me know.

    H.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. ess

    ess New Member

    Joined:
    Jun 8, 2007
    Messages:
    133
    Likes Received:
    0
    just to clarify... this is an issue on the spa962 phone's dial plan. look at the following guide, specifically point 13:

    http://www.3cx.com/sip-phones/linksys-SPA-921.html

    Although this allows this * features to work, it introduces a new problem where there is only a 2 second delay before dialing times out.

    Let us know how it goes.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  5. Henk

    Henk Member

    Joined:
    Nov 13, 2007
    Messages:
    250
    Likes Received:
    0
    Can you setup a digtal mask on that phone?
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.