3cx connected to 2 offices

Discussion in '3CX Phone System - General' started by joostehost, Jul 30, 2012.

Thread Status:
Not open for further replies.
  1. joostehost

    Joined:
    Jul 30, 2012
    Messages:
    1
    Likes Received:
    0
    Hi,

    I have two offices, in one of them I have a 3cx server. In that office we have 2 Yealink phones.

    Now I want to connect this office to a remote office over the internet.

    That office will use 2 soft phones at first.

    I would just like to know how I can connect these two offices so they both use the server in the first office?

    Thanks
     
  2. lneblett

    lneblett Well-Known Member

    Joined:
    Sep 7, 2010
    Messages:
    2,061
    Likes Received:
    56
    Look at the blog for remote extensions as this will give you the instructions on how to remote phones. You may also need to consider using the SIP proxy manager (again look on the blog for this) as it may help to overcome an firewall issues.
     
  3. jpillow

    jpillow Well-Known Member

    Joined:
    Jun 20, 2011
    Messages:
    1,342
    Likes Received:
    0
    You can setup the SIP Proxy manager at the remote location and that will handle those remote exetnsions, or you can setup two remote extensions using 3cx tunnel. Both can be found in 3CX Blog just search remote extension. I've usually just set up remote extensions using the 3cx tunnel or even setup the remote user with a VPN.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.