3CX Myphone Connection

Discussion in '3CX Phone System - General' started by agilis, May 9, 2013.

Thread Status:
Not open for further replies.
  1. agilis

    Joined:
    Aug 12, 2010
    Messages:
    19
    Likes Received:
    0
    We have 2 offices that are connect on the 3CX system though Port/trunks.

    Right now we have one office 3CX MyPhone interface and another 3CX MyPhone interface for the other office.

    Is there anyway to combine both offices within ONE 3CX MYPHONE interface?
     
  2. craigreilly

    craigreilly Well-Known Member

    Joined:
    Feb 1, 2012
    Messages:
    2,956
    Likes Received:
    179
    depending on what version you are on you can publish the information across the "bridge" to the other end. Then in MyPhone you will have a TAB at the top to the other office.
    So, first are the offices connected via a 3cx Bridge? You mention they are connected thru a trunk.
    The Enterprise versions can publish their presence information. So, in your case, both sides would need to be enterprise (32 call version and above).
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. agilis

    Joined:
    Aug 12, 2010
    Messages:
    19
    Likes Received:
    0
    Version V11 SP3. Yes the offices are connected via 3cx Bridge.

    How would I be able to publish the information across the bridge?

    Once I'm able to publish the information across the bridge in MYPHONE, will I be able to send chats across the bridge inside MYPHONE to both offices?
     
  4. craigreilly

    craigreilly Well-Known Member

    Joined:
    Feb 1, 2012
    Messages:
    2,956
    Likes Received:
    179
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.