3CX & Panasonic KX-UT136

Discussion in '3CX Phone System - General' started by rsh, Feb 21, 2012.

Thread Status:
Not open for further replies.
  1. rsh

    rsh

    Joined:
    Mar 25, 2011
    Messages:
    17
    Likes Received:
    0
    Hi,

    I'm trying to configure the Panasonic KX-UT136 to work with 3CX. Only the BLF's wont work. I've tried several parameters but it wont work.

    Has anybody got it working? I'm using firmware 01.081.

    Greetings,

    Albert
     
  2. eagle2

    eagle2 Well-Known Member

    Joined:
    Apr 27, 2011
    Messages:
    1,085
    Likes Received:
    11
    You need to set extension number as parameter for BLF and to make correctly SIP settings into the phone
    (in this example 200, 201, ...):


    Important: Make sure your phone firmware is at least 1.025 !!, however I recommend the latest 1.081.
    This is working fine (incl. call pick-ups & holds, blind & attended transfers, etc.).

    Also you need to set correctly (in this example 244 is the extension number, 10.251.222.114 is my 3CX server):

    I'm using widely Panasonic KX-UT1xx phones and everything is working fine.

    Check also http://panasonic.net/pcc/products/sipphone/ for more details.

    Regards
     

    Attached Files:

    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.