3CX Phone & IPPhone

Discussion in '3CX Phone System - General' started by csp, Jul 6, 2015.

Thread Status:
Not open for further replies.
  1. csp

    csp

    Joined:
    Apr 24, 2015
    Messages:
    14
    Likes Received:
    0
    Hello ,

    I have made an extension ex. 110 that it is provisioned with a snom Ip phone and also an android phone.

    Now when a call comes in both phones are ringing and i want to ring the android phone only when im out of the office

    Best Regards
     
  2. Saqqara

    Saqqara Well-Known Member

    Joined:
    Mar 12, 2014
    Messages:
    1,094
    Likes Received:
    165
    You need to check, configure the forwarding rules for the extension for each

    Edit the extension, and you will see 'Forwarding Rules' tab,
     
  3. charles

    Joined:
    Apr 27, 2015
    Messages:
    29
    Likes Received:
    0
    Hi CSP, When you have one IP Phone and a softphone configured on the same extension you can not set 3CXPhone for Android to ring while the IP Phone does not. You can configure forwarding rules in 3CX Phone System so that incoming calls ring your mobile number when your status is set to away. You can still make outgoing calls using your 3CXPhone for Android configured on your extension even though your status is set to away.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,732
    Likes Received:
    277
    You might consider assigning the Android phone a different extension number and making both you desk extension and the Android extension members of the same ring group. You would have to assign you original extension number to a dummy extension that then routed to the ring group. When a call came in, and the desk phone was set to away, or otherwise not available, the call would still ring the Android phone. If not answered, the call could then be sent to the VM of the desk extension number for later retrieval.

    A bit of a work around. There may be something a bit more "elegant", that others come up with.
     
Thread Status:
Not open for further replies.