3CX SN4120/2BIS4V [solved]

Discussion in '3CX Phone System - General' started by Brice, Oct 28, 2016.

Thread Status:
Not open for further replies.
  1. Brice

    Joined:
    Mar 23, 2009
    Messages:
    3
    Likes Received:
    0
    Hi,

    I have a 3CX V12. Recently I have installed a Patton SN4120/2BIS4V.
    It seems that second port does not work.

    I have this errors very often :

    Call or Registration to 0XXXXX4870@(Ln.10002@PATTON) has failed. [ V4 192.168.1.250:5060 UDP target domain=unspecified mFlowKey=904 ] replied: 503 Service Unavailable; from IP:192.168.1.250:5060

    Call or Registration to 0XXXXX4570@(Ln.10002@PATTON) has failed. [ V4 192.168.1.250:5062 UDP target domain=unspecified mFlowKey=904 ] replied: 486 Busy Here; from IP:192.168.1.250:5062

    Call or Registration to 0XXXXX8198@(Ln.10002@PATTON) has failed. [ V4 192.168.1.250:5062 UDP target domain=unspecified mFlowKey=904 ] replied: 403 Forbidden; from IP:192.168.1.250:5062

    Can you give me a hint ?
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,744
    Likes Received:
    281
    Re: 3CX SN4120/2BIS4V

    The physical line plugged into line 2 is good (battery) ? Try swapping the cords, on the back of the gateway, for lines 1 and 2.
     
  3. Brice

    Joined:
    Mar 23, 2009
    Messages:
    3
    Likes Received:
    0
    Re: 3CX SN4120/2BIS4V

    Ok, it's seems to be a line is down.

    Thanks.
     
Thread Status:
Not open for further replies.