3CX V15 and old Cisco SPA 92X - 94X

Discussion in '3CX Phone System - General' started by itgs, Feb 17, 2017.

Thread Status:
Not open for further replies.
  1. itgs

    Joined:
    Nov 8, 2008
    Messages:
    54
    Likes Received:
    1
    I have some old Cisco SPA922 and 942 that are connected with my recently updated 3CX V15.
    All is working but I noticed that are ip phone no more supported.

    In the "Phone Provisioning" section there is "3CX Client" indicated in "Your Phones" configuration of the extension (see attached image).

    Is it all ok or there is something I have to know (or to do) ?

    Thank you for supporto
     

    Attached Files:

  2. YiannisH_3CX

    YiannisH_3CX Support Team
    Staff Member 3CX Support

    Joined:
    May 10, 2016
    Messages:
    4,443
    Likes Received:
    282
    Hello @itgs

    Since the phones you are using are not supported there is no template for those phones and since you manually registered them then they will not appear under the Phone Provisioning tab in the extension settings. So this is normal
     
  3. itgs

    Joined:
    Nov 8, 2008
    Messages:
    54
    Likes Received:
    1
    Thank you Yiannish for your reply.

    Do you suggest to disable autoprovision configuration in the phone ?

    Thank you
     
Thread Status:
Not open for further replies.