7961G-GE support?

Discussion in '3CX Phone System - General' started by Enoch, May 7, 2016.

Thread Status:
Not open for further replies.
  1. Enoch

    Joined:
    Mar 5, 2015
    Messages:
    35
    Likes Received:
    0
    Can anyone confirm if the Cisco IP Phone 7961G-GE works with 3CX?

    We are running into power issues with our Cisco 3550 switch and want to ensure the phone is compatible with 3CX before we spend more money on these phones.
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,757
    Likes Received:
    286
    Have a read through this.
    http://www.3cx.com/sip-phones/cisco-7940g-7960g/
    You could install a Demo version of 3CX and try setting up one set as a trial, to see how it goes.

    I'm not certain, offhand, if the -GE is a factor in determining compatibility.
     
  3. Enoch

    Joined:
    Mar 5, 2015
    Messages:
    35
    Likes Received:
    0
    I believe the "GE" does make a difference. while the 7940/1/G and 7960/1/G require DHCP option 66, I'm reading online that these 7961G-GE requires a custom DHCP option 150... Which I have added, but I still cannot get the DHCP going for these damn phones... *sigh*
     
Thread Status:
Not open for further replies.