Add VoIP Line

Discussion in '3CX Phone System - General' started by sonlm, Oct 12, 2007.

  1. sonlm

    Joined:
    Mar 28, 2007
    Messages:
    13
    Likes Received:
    0
    Hi,

    I have problem with 3CX when adding VoIP line :)
    I have a free account from VoIPTalk (VoIPTalk.Org)

    External Number: 88484787
    Authentication ID: 88484787
    Authentication Password: ******

    Registrar/Proxy Hostname or IP: voiptalk.org
    Outbound Proxy Hostname or IP: nat.voiptalk.org:5065
    Registrar/Proxy Port: 5065
    Outbound Proxy Port: 5065
    STUN server Port: 3478
    STUN server Hostname or IP: I left it blank

    Outbount rule is 8

    The VoIP Line status is still "Not Registered" (in red)
    When I make call out via VoIP line (with prefix 8) to another VoIPTalk acc - on an IPPhone - it's OK (phone was ringed).
    But from this IPPhone call into the PBX (call 88484787) is not possible (receive disconnect signal).

    During calls, the VoIP line status is "Not Registered"

    VoIPTalk Accs are OK (tested with 2 IpPhone)

    Is there something wrong?

    Best regards,
    Sonlm
     
  2. miraportuga

    miraportuga Member

    Joined:
    Aug 7, 2007
    Messages:
    297
    Likes Received:
    0
    Can you provide us some logs?

    Cheers
     
  3. RobLloyd

    RobLloyd Member

    Joined:
    Oct 13, 2006
    Messages:
    488
    Likes Received:
    0
    3CX uses port 5060 by default. Your settings you said were to 5065. Did you change the 5060 to 5065 in 3CX?
     
  4. ihasham

    Joined:
    Dec 4, 2007
    Messages:
    2
    Likes Received:
    0
    Port numbers

    The port for VOIP talk is as follows:

    Registrar/Proxy Hostname or IP voiptalk.org 5060

    Outbound Proxy Hostname or IP nat.voiptalk.org 5065

    Kind regards,
     
  5. nickybrg

    nickybrg Well-Known Member
    3CX Staff

    Joined:
    Jun 7, 2007
    Messages:
    1,618
    Likes Received:
    14
    Hi

    This Voip provider works out of the box with 3cx. Given the settings are correct it registers immediately and I was able to make outgoing and receive incoming calls.

    Do not use the Outbound proxy setting and use the Generic Voip Provider. Do not use the Sip Trunk.

    Dtmf works and even transfers.

    Regards
     

Share This Page