after change Public ip no incoming calls

Discussion in '3CX Phone System - General' started by jensnb, Mar 30, 2008.

Thread Status:
Not open for further replies.
  1. jensnb

    Joined:
    Mar 11, 2008
    Messages:
    10
    Likes Received:
    0
    Hello this is my problem,
    i have an dynamic ip and the provider is 1und1, when the ip is changing i have no incoming calls, outgoing after stun check is ok. I must manual registering the VOIP Lines, then it ist working. Can I make this automatic after IP change?

    Here is my log

    15:20:21.296 StunClient::process [CM506003]: Resolved SIP external IP:port has changed to (84.188.44.57:5060) on Transport 10.0.0.10:5060
    15:20:21.250 StunClient::eek:nInitTests [CM506001]: STUN request to resolve SIP external IP:port mapping is sent to STUN server 212.227.15.200:3478 over Transport 10.0.0.10:5060
     
  2. jensnb

    Joined:
    Mar 11, 2008
    Messages:
    10
    Likes Received:
    0
    The 3CX Version is 3CXPhoneSystem 5.1.4287.0
     
  3. jensnb

    Joined:
    Mar 11, 2008
    Messages:
    10
    Likes Received:
    0
    Hi,
    the Server is behind a gateway (NAT) is this the problem?

    sorry for my bad english (german)
     
Thread Status:
Not open for further replies.