Analog phones on the 3CX system

Discussion in '3CX Phone System - General' started by pdq, Dec 29, 2014.

Thread Status:
Not open for further replies.
  1. pdq

    pdq

    Joined:
    Dec 3, 2009
    Messages:
    82
    Likes Received:
    0
    I have analog extensions connected to the 3CX system via Linksys adapter.
    Having issues transferring from analog extensions to the digital desk phones.
    Anyone have suggestions/experience? :?:
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,570
    Likes Received:
    247
    You'll have to provide additional information about the type of transfer (attended , or unattended), and what the "issue" actually is. A hook-flash, attended transfer, is pretty straight forward, and does not usually cause problems,
     
  3. ian.watts

    ian.watts Active Member

    Joined:
    Apr 8, 2011
    Messages:
    532
    Likes Received:
    0
    Indeed, I use the hook-flash transfer with the analog Polycom units on an SPA3102. Seems to work okay for blind transfers, attended transfers, and conferences.

    You will need to configure those options in the SPA3102 UI.. I don't think a template gave me those types of options I needed.. and the codes were of my own choosing anyway.
     
Thread Status:
Not open for further replies.