Anyone can success to get the incoming FAX and outgoing FAX

Discussion in '3CX Phone System - General' started by 5qg4, Oct 24, 2007.

  1. 5qg4

    5qg4 Active Member

    Joined:
    Jan 31, 2007
    Messages:
    643
    Likes Received:
    0
    Anyone can success to get the incoming FAX and outgoing FAX by using V4.0.3035.2?
     
  2. Nick Galea

    Nick Galea Site Admin

    Joined:
    Jun 6, 2006
    Messages:
    1,731
    Likes Received:
    41
    We did :) Let me know what VOIP gateway you are using for FAX....
     
  3. Urbok

    Urbok New Member

    Joined:
    Jul 14, 2007
    Messages:
    119
    Likes Received:
    0
    if you amplify rx and tx gain on your fxs adapter you can fax also with version 3.
     
  4. rnoguera

    Joined:
    Oct 25, 2007
    Messages:
    89
    Likes Received:
    0
    We are succesfully receiving faxes with V4 integrated fax server.

    We can only send from an extension if we use G711 voice codec and fax passthroug. We have not yet succeded in using T.38.

    PSTN Gateway is PATTON 4554.

    In the Gateway, we have created an adittional SIP GATEWAY, all the external calls to the FAX number are routed to this SIP GATEWAY.
    Patton Smartnodes can do this type of thing.
    This way we can tell 3CX that all the calls coming from this particular SIP GATEWAY are fax calls.

    We didn't try the config file generated by 3CX, but we looked at it, and I suspect it was not correct (T38 was not correctlyactivated).
     

Share This Page