Anyone using 8x8 SIP trunk

Discussion in '3CX Phone System - General' started by scott, Aug 12, 2010.

Thread Status:
Not open for further replies.
  1. scott

    Joined:
    Jul 30, 2009
    Messages:
    27
    Likes Received:
    0
    Are you using 8x8 for their SIP trunks with 3CX and if so how is it working? I'm looking for a working configuration to test with them as they were very competitive when bidding my project. I would like help setting up the carrier profile in 3CX so I don't have to reinvent the wheel.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  2. sycotel

    Joined:
    Sep 26, 2010
    Messages:
    1
    Likes Received:
    0
    ha anyone had any luck with this yet? i need config mission critical... this sucks, all i can find on my error is i guess for older versions the menus are no longer the same and i can no longer find what they are talking about please see my server log below...


    21:50:49.066 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
    INVITE sip:+1XXXXXXXXXXX@XXX.XXX.XXX.XXX:5060;transport=udp;user=phone SIP/2.0
    Via: SIP/2.0/UDP 192.84.16.18:5060;branch=z9hG4bKaheWYiiRlmD90fb3565ef5b4d8bafe41a68d4befeed8
    Max-Forwards: 62
    Record-Route: <sip:bevfhVXJxVkzcVDhUId@192.84.16.18:5060;lr;id=af1b90cb77980a4ef3658dced6d8c8d8>
    Contact: <sip:bMuNtCOJxVkzcVDhUId@192.84.16.17:6464>
    To: <sip:+1XXXXXXXXXXX@XXXXXXX.tg-gtg.packet8.net.;user=phone>
    From: <sip:1XXXXXXXXXXX@209.247.17.37>;tag=beP9T90sZ8wlK
    Call-ID: HOUMGC0120100926025047005430@209.244.63.16
    CSeq: 1274226602 INVITE
    Session-Expires: 2117
    Supported: timer, histinfo
    User-Agent: Packet8/1.2.134.2 (OutCarrierAccess) eSLEE/0.13.98.1
    Content-Length: 0
    Remote-Party-ID: <sip:1XXXXXXXXXXX@209.247.17.37>;party=calling;privacy=off;screen=yes
     
Thread Status:
Not open for further replies.