Authentication failed for ip phone

Discussion in '3CX Phone System - General' started by cow101, Jun 23, 2011.

Thread Status:
Not open for further replies.
  1. cow101

    Joined:
    Jun 23, 2011
    Messages:
    5
    Likes Received:
    0
    Hello I just installed my 3cx server and I have two offices, one not on the local lan, I can not get either offices to work. I tryed to install 3cx ip phone on the server I get this error:

    2:32:55.766 [CM102001]: Authentication failed for SipReq: REGISTER 127.0.0.1:5060 tid=4221425f2b4e5d4f cseq=REGISTER contact=100@127.0.0.1:37212 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

    The password for it is just the same as the extension number, so what did I do wrong?
     
  2. nbailey

    nbailey Member

    Joined:
    Jan 31, 2011
    Messages:
    359
    Likes Received:
    0
    Authentication ID and Password have to be incorrect, this is the only reason you would get this msg. Double check and do change it from extension number, that is very unsecure.


    Thanks,
    Nate
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. cow101

    Joined:
    Jun 23, 2011
    Messages:
    5
    Likes Received:
    0
    I found the problem, In the Extension Settings go to other and uncheck Disallow Use of this Extension Outside of LAN.

    That seemed to be the cause.
     
Thread Status:
Not open for further replies.