Authenticztion failed

Discussion in '3CX Phone System - General' started by KOUSIS, Nov 24, 2010.

Thread Status:
Not open for further replies.
  1. KOUSIS

    Joined:
    Nov 17, 2010
    Messages:
    26
    Likes Received:
    0
    Hello

    I can't call outside numbers with my grandstream 4104 and when i see the logs i have many lines of

    14:22:28.433 [CM102001]: Authentication failed for SipReq: REGISTER domain.ath.cx tid=263972584 cseq=REGISTER contact=204@10.42.44.21:5066 / 9635 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

    domain.ath.cx is my DynDNS ip

    Any ideas?
    Thank you
     
  2. mfm

    mfm Active Member

    Joined:
    Mar 4, 2010
    Messages:
    641
    Likes Received:
    2
    Hi,

    The pbx is indiacting that your credentails dont seem to match, im guessing your using this phone as an external extension. If you are convicned that your cerdentials are correct then please use an Ip rather then DynDns adress and see if it connects, if it does work please post back and I will advise the steps to follow.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.