blf not working 3cx on wan

Discussion in '3CX Phone System - General' started by leendertvdk, Sep 21, 2012.

Thread Status:
Not open for further replies.
  1. leendertvdk

    Joined:
    Sep 21, 2012
    Messages:
    4
    Likes Received:
    0
    Dear Forum members,

    We have 3cx running on a VPS in a datacenter, this vps is equal to the wan ip accessible, without hardware firewall. Only through software firewall get this vps protected.

    What the problem is:

    We use linksys SPA962 devices without problems connecting to the PBX. Also call and sound is fine.
    Where I only against to walk the next blf that the function will not work. The light continues to blink orange.

    If I check the firewall allows running 3cx he gives no errors.

    Furthermore, as blf rain the following:
    fnc=blf+sd+cp;sub=100@$PROXY;ext=100@$PROXY;nme=Test

    Furthermore, we use V11 from 3cx with SP 1 on it.

    What could the problem be?
    Is there somewhere something set or??

    Thanks for your answer

    Mvg leendert
     
  2. mixig

    mixig Active Member

    Joined:
    Dec 13, 2011
    Messages:
    519
    Likes Received:
    11
    Hi,

    take a look on this link, maybe will help
    http://www.3cx.com/forums/spa50x-fw-7-5-2a-7-5-3-fyi-31639.html
     
Thread Status:
Not open for further replies.