BLF Version 5 Grandstream

Discussion in '3CX Phone System - General' started by nateb, Dec 10, 2007.

  1. nateb

    Joined:
    Oct 19, 2007
    Messages:
    68
    Likes Received:
    0
    When i enable BLF on my grandstream phones, the phones freak out when they ring , and then lock up. You have to powercycle the phones to get them to work again? I am using firmware version : 1.1.5.5

    any ideas?
     
  2. kelddamsbo

    Joined:
    Feb 22, 2007
    Messages:
    24
    Likes Received:
    0
    Same problem here, and I'm using 1.1.5.15
     
  3. AldoLinares

    AldoLinares New Member

    Joined:
    Nov 12, 2007
    Messages:
    135
    Likes Received:
    0
    Same problem. I just disabled BLF on my GXP2000 newest Firmware.

    The phone even restart itself sometimes.
     
  4. silentfun

    silentfun Member

    Joined:
    Dec 11, 2006
    Messages:
    364
    Likes Received:
    0
    i have tryed all FW ver. i could get and i have problems with all.

    but i got 2 new phones and tryed one of the new and that was stable - so it is possible more a problem of quality then of a problem of the FW.

    atm i use old 1.1.4.17 that is stable with some issues like voice quality.

    with the 2 new phone i start testing the latest 1.1.5.15 on weekend.

    Andy
     
  5. AldoLinares

    AldoLinares New Member

    Joined:
    Nov 12, 2007
    Messages:
    135
    Likes Received:
    0
    Anybody with a working GXP2000 with BLF??
     

Share This Page