Blocked, Anonymous and some 800 #s won't transfer?

Discussion in '3CX Phone System - General' started by scythe000, Jan 6, 2012.

Thread Status:
Not open for further replies.
  1. scythe000

    Joined:
    Nov 8, 2011
    Messages:
    66
    Likes Received:
    0
    So this is odd. Couldn't see anything to help in the logs, but when unknown, blocked or anonymous calls and apaprently some 800 #s from what they tell me, come in, they cannot transfer the calls.
     
  2. scythe000

    Joined:
    Nov 8, 2011
    Messages:
    66
    Likes Received:
    0
    They report it says "Transfer Request Failed"
     
  3. scythe000

    Joined:
    Nov 8, 2011
    Messages:
    66
    Likes Received:
    0
    Anyone?
    Another piece of information is the transfer only fails when trying to transfer to an outside line, it works on in-house transfers.
     
  4. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,869
    Likes Received:
    304
    How far does the transfer get (referring to the 3CX logs)? Is this going back out via a VoIP provider? They may not like the name you are passing on to them.
     
  5. scythe000

    Joined:
    Nov 8, 2011
    Messages:
    66
    Likes Received:
    0
    I haven't been able to see it in action in the 3CX logs. Is there a way to look back further than what it shows through the web interface? It's going out through our SIP trunk with AT&T, not VoIP. AFAIK, it drops right when they try to transfer.
     
  6. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,869
    Likes Received:
    304
    Well...that is VoIP.

    You are going to have to get a call to fail (call in blocking your number), collect the log and post it here. What type of set(s) is this happening with? The 3CX log may provide some clues. Do you have any other outgoing trunk(s) that you can test a transfer over?
     
  7. scythe000

    Joined:
    Nov 8, 2011
    Messages:
    66
    Likes Received:
    0
    ok, i'll ask them.
     
Thread Status:
Not open for further replies.