Bridge Limit

Discussion in '3CX Phone System - General' started by jendter, Jul 10, 2013.

Thread Status:
Not open for further replies.
  1. jendter

    Joined:
    Jul 10, 2013
    Messages:
    11
    Likes Received:
    0
    Is there a limit to the number of bridges that can be configured in the Professional edition? We have 14 sites and I can see at least one site will have a bridge to each remote site.
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,375
    Likes Received:
    231
    As I understand it, the only limitation is the number of conversations based on your licence. Extensions and trunks, (and I assume bridges, in that later category), have no limitations for practical purposes, at least none that I have seen reported. Your hardware specs will play a role in limiting size.

    Of course, with that many sites, you are going to have to plan out your numbering scheme and outbound rules to try to keep things (dialling) as simple as possible.
     
  3. jendter

    Joined:
    Jul 10, 2013
    Messages:
    11
    Likes Received:
    0
    Thanks for the information. We are busy planning the dialing schemes. We are lucky in the fact that our call volume is quite low; usually around a max of 3 or 4 simultaneous calls per site.
     
Thread Status:
Not open for further replies.