Bridge prefix mismatch

Discussion in '3CX Phone System - General' started by NetVu IT, Mar 27, 2017.

Thread Status:
Not open for further replies.
  1. NetVu IT

    Joined:
    Mar 16, 2017
    Messages:
    21
    Likes Received:
    0
    I've a number of 3CX to 3CX bridges set up. One of these is set for an access code of 4 with most of the extensions on the other end starting with a 4; when someone dials one of these the 44 is being stripped, as it's being matched as +44, so only the last 2 digits of the extension appear as CLID. This only happens for the home country code. Other than changing the trunk access code, am I missing something obvious to stop this happening?

    Cheers.
     
  2. AlexDBarrett

    Joined:
    Jan 25, 2011
    Messages:
    71
    Likes Received:
    9
    Shooting from the hip as I do not have the full picture.

    My first thought is to change your numbering scheme.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. MRM

    MRM

    Joined:
    Dec 21, 2016
    Messages:
    53
    Likes Received:
    3
Thread Status:
Not open for further replies.