Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Bug with the 1.3.2

Discussion in 'Android' started by LeDob, Oct 4, 2011.

Thread Status:
Not open for further replies.
  1. LeDob

    Joined:
    Aug 7, 2011
    Messages:
    7
    Likes Received:
    0
    Hello everybody !!!!!!

    I use 3CXphone system V10 SP3 with a linksys SPA3102 gateway.
    To phone i use 3cxphone for windows V6 and 3cxphone for android.With the 1.3.1 everything was OK.
    Now with the 1.3.2 I cannot use the spa3102 access from the 3cxphone android.

    Here is the log with android access:


    14:40:54.875 [CM504002]: Ext.14: a contact is unregistered. Contact(s): []
    14:36:06.640 [CM506001]: STUN request to resolve SIP external IP:port mapping is sent to STUN server [ V4 96.9.132.83:3478 UDP target domain=unspecified mFlowKey=0 ] over Transport [ V4 192.168.0.2:5060 UDP target domain=unspecified mFlowKey=0 ]
    14:35:16.937 [CM503016]: Call(12): Attempt to reach <sip:%230**1@192.168.0.2:5060> failed. Reason: Not Acceptable HereReason Unknown
    14:35:16.921 [CM503003]: Call(12): Call to sip:**1@192.168.0.1:5060 has failed; Cause: 488 Not Acceptable Here; warning: Media type not available; from IP:192.168.0.1:5060
    14:35:16.890 [CM503025]: Call(12): Calling PSTNline:**1@(Ln.10002@SPA3102)@[Dev:sip:10002@192.168.0.1:5060]
    14:35:16.843 [CM503004]: Call(12): Route 1: PSTNline:**1@(Ln.10002@SPA3102)@[Dev:sip:10002@192.168.0.1:5060]
    14:35:16.843 [CM503010]: Making route(s) to <sip:%230**1@192.168.0.2:5060>
    14:35:16.828 [CM505001]: Ext.14: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [3CXPhone for Android 1.3.2] PBX contact: [sip:14@127.0.0.1:5060]
    14:35:16.828 [CM503001]: Call(12): Incoming call from Ext.14 to <sip:%230**1@192.168.0.2:5060>
    14:35:09.671 [CM504001]: Ext.14: new contact is registered. Contact(s): [sip:14@192.168.0.47:5060;ob/14]


    And here is the log with the 3cxphone for windows which runs fine:


    14:47:19.484 [CM503008]: Call(13): Call is terminated
    14:47:11.093 Currently active calls - 1: [13]
    14:47:10.953 [CM503007]: Call(13): Device joined: sip:10002@192.168.0.1:5060
    14:47:10.953 [CM503007]: Call(13): Device joined: sip:13@127.0.0.1:60844;rinstance=3a662215eed80766
    14:47:10.906 [CM505002]: Gateway:[SPA3102] Device info: Device Identified: [Man: Linksys;Mod: SPA series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA3102-5.1.10(GW)] PBX contact: [sip:10002@192.168.0.2:5060]
    14:47:10.906 [CM503002]: Call(13): Alerting sip:10002@192.168.0.1:5060
    14:47:10.843 [CM503025]: Call(13): Calling PSTNline:**1@(Ln.10002@SPA3102)@[Dev:sip:10002@192.168.0.1:5060]
    14:47:10.812 [CM503004]: Call(13): Route 1: PSTNline:**1@(Ln.10002@SPA3102)@[Dev:sip:10002@192.168.0.1:5060]
    14:47:10.796 [CM503010]: Making route(s) to <sip:%230**1@192.168.0.2:5060>
    14:47:10.796 [CM505001]: Ext.13: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [3CXPhone 6.0.19548.0] PBX contact: [sip:13@127.0.0.1:5060]
    14:47:10.781 [CM503001]: Call(13): Incoming call from Ext.13 to <sip:%230**1@192.168.0.2:5060>
    14:47:01.562 [CM504001]: Ext.13: new contact is registered. Contact(s): [sip:13@127.0.0.1:60844;rinstance=3a662215eed80766/13]


    Do you know where i can download the prior version 1.3.1 ??????

    Thanks a lot for your help
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  2. LeDob

    Joined:
    Aug 7, 2011
    Messages:
    7
    Likes Received:
    0
    Hello again

    I am very confused shame on me No bug with the 1.3.2.

    I made a mistake: few day ago i changed the audio codecs and only the gsm was active.This worked
    fine with voip trunks but not with the SPA3102 gateway using the FXO plug

    Sorry
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.