Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Call from Outlook 2010 problem

Discussion in '3CX Phone System - General' started by smssly, Aug 26, 2011.

Thread Status:
Not open for further replies.
  1. smssly

    Joined:
    Aug 26, 2011
    Messages:
    4
    Likes Received:
    0
    We have 3CX Assistance:
    Installed version 9.0.15770.0
    Executed version 9.0.0.15723

    And 3CX Phone 5.0.14900.0

    With 3CX CRM add-in for Outlook 2010 installed, we have 3CX tab shows up when we select contact in Outlook. When we check 3CX Assistance > File -> CRM Settings, the CRM plug-in is running OK.

    However, when we try to use 3CX tab > Call Mobile to call contact (e.g. 0412341234), the 3CX Phone will pop up, but it shows:

    MakeCall
    MakeCall
    Put on Hold

    And it never go through to ring the number. just like below:

    [​IMG]

    If you check the sip server log, here is the trace:

    16:30:27.034 [CM503008]: Call(2550): Call is terminated
    16:30:18.033 Currently active calls - 1: [2550]
    16:30:09.483 [CM505003]: Provider:[mynetfone-sip] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [ENSR3.0.6] PBX contact: [sip:0212341234@58.179.0.248:5060]
    16:30:09.483 [CM503002]: Call(2550): Alerting sip:0212341234@sip20.mynetfone.com.au:5060
    16:30:09.109 [CM503025]: Call(2550): Calling VoIPline:0412341234@(Ln.10003@mynetfone-sip)@[Dev:sip:0212341234@sip20.mynetfone.com.au:5060]
    16:30:09.031 [CM503004]: Call(2550): Route 2: VoIPline:0412341234@(Ln.10005@mynetfone-sip01)@[Dev:sip:0291466681@sip20.mynetfone.com.au:5060]
    16:30:09.031 [CM503004]: Call(2550): Route 1: VoIPline:0412341234@(Ln.10003@mynetfone-sip)@[Dev:sip:0212341234@sip20.mynetfone.com.au:5060]
    16:30:09.015 [CM503010]: Making route(s) to <sip:0412341234@127.0.0.1:5060>
    16:30:08.110 [CM503007]: Call(2550): Device joined: sip:6116@10.0.3.100:2048;line=rhq2e9it
    16:30:08.110 [CM503007]: Call(2550): Device joined: sip:MakeCall@127.0.0.1:40600;rinstance=51917c28224e6cbf
    16:30:07.939 [CM505001]: Ext.6116: Device info: Device Identified: [Man: Snom;Mod: 3xx series;Rev: General] Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [snom300/7.1.8] PBX contact: [sip:6116@10.0.3.15:5060]
    16:30:07.939 [CM503002]: Call(2550): Alerting sip:6116@10.0.3.100:2048;line=rhq2e9it
    16:30:07.814 [CM503025]: Call(2550): Calling Ext:Int.6116@[Dev:sip:6116@10.0.3.100:2048;line=rhq2e9it]
    16:30:07.720 [CM503004]: Call(2550): Route 1: Ext:Int.6116@[Dev:sip:6116@10.0.3.100:2048;line=rhq2e9it]
    16:30:07.720 [CM503010]: Making route(s) to <sip:*96116@127.0.0.1:5060;nofwd=1>
    16:30:07.720 [CM505001]: Ext.MakeCall: Device info: Device Identified: [Man: 3CX Ltd.;Mod: 3CX MakeCall Helper;Rev: 1] Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [3CX MakeCall helper] PBX contact: [sip:MakeCall@127.0.0.1:5060]
    16:30:07.720 [CM503001]: Call(2550): Incoming call from Ext.MakeCall to <sip:*96116@127.0.0.1:5060;nofwd=1>



    While if we dial up directly from 3CX phone, it can go through with no problem. And here is the trace for this:

    17:01:14.095 [CM503008]: Call(2551): Call is terminated
    17:01:07.979 [CM505003]: Provider:[mynetfone-sip] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [ENSR3.0.6] PBX contact: [sip:0212341234@58.179.0.248:5060]
    17:01:07.979 [CM503002]: Call(2551): Alerting sip:0212341234@sip20.mynetfone.com.au:5060
    17:01:07.636 [CM503025]: Call(2551): Calling VoIPline:0412341234@(Ln.10003@mynetfone-sip)@[Dev:sip:0212341234@sip20.mynetfone.com.au:5060]
    17:01:03.798 [CM503004]: Call(2551): Route 2: VoIPline:0412341234@(Ln.10005@mynetfone-sip01)@[Dev:sip:0291466681@sip20.mynetfone.com.au:5060]
    17:01:03.798 [CM503004]: Call(2551): Route 1: VoIPline:0412341234@(Ln.10003@mynetfone-sip)@[Dev:sip:0212341234@sip20.mynetfone.com.au:5060]
    17:01:03.783 [CM503010]: Making route(s) to <sip:0412341234@10.0.3.15:5060>
    17:01:03.783 [CM505001]: Ext.6116: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [3CXPhone 5.0.14900.0] PBX contact: [sip:6116@10.0.3.15:5060]
    17:01:03.767 [CM503001]: Call(2551): Incoming call from Ext.6116 to <sip:0412341234@10.0.3.15:5060>

    So it seems like when dial from Outlook, after two routes, it goes to the dialed number at local IP (127.0.0.1) like below:
    Making route(s) to <sip:0412341234@127.0.0.1:5060>
    Rather than the correct SIP server IP address .

    Appreciate anyone can help on this issue.
     

    Attached Files:

    #1 smssly, Aug 26, 2011
    Last edited by a moderator: Feb 20, 2017
  2. smssly

    Joined:
    Aug 26, 2011
    Messages:
    4
    Likes Received:
    0
    #2 smssly, Aug 29, 2011
    Last edited by a moderator: Feb 20, 2017
  3. smssly

    Joined:
    Aug 26, 2011
    Messages:
    4
    Likes Received:
    0
    Is there anyone else has similar problem?
     
Thread Status:
Not open for further replies.