Solved Call Quality issue during Conference

Discussion in '3CX Phone System - General' started by techdummy, Oct 12, 2017.

Thread Status:
Not open for further replies.
  1. techdummy

    techdummy New Member

    Joined:
    Sep 22, 2017
    Messages:
    171
    Likes Received:
    9
    Hi,

    We have an issue with our Conference system.
    The issue is that the call quality is very poor, crackly, lots of distortion and we are unable to hear the client properly. They are unable to hear us too. We tried changing the devices but the issue is still there.

    Any ideas about what might be the possible causes? And how to go about troubleshooting this issue?

    Thanks
     
  2. IoannisM_3CX

    IoannisM_3CX Support Team
    Staff Member 3CX Support

    Joined:
    Aug 10, 2017
    Messages:
    228
    Likes Received:
    17
    Hello @techdummy

    What phones are you using?Are they using the default templates? Have you ran the firewall checker with no errors??

    Thank you
     
  3. techdummy

    techdummy New Member

    Joined:
    Sep 22, 2017
    Messages:
    171
    Likes Received:
    9
    Hello @IoannisM_3CX

    We are running 3CX client for windows and have configured it to use Jabra Speak 510 for conference.
    Firewall checker didnt show any errors.
     
  4. IoannisM_3CX

    IoannisM_3CX Support Team
    Staff Member 3CX Support

    Joined:
    Aug 10, 2017
    Messages:
    228
    Likes Received:
    17
    Hi,

    When you use only the 3CX client with no speakers or extra devices, does the issue occurs??
     
    techdummy likes this.
  5. John Ranger

    Joined:
    Jan 14, 2017
    Messages:
    23
    Likes Received:
    8
    Hi Techdummy.

    this sounds like you either have a Problem with the Jabra or that your Internet link is too slow to accomodate for all the calls which are used during the conference.

    Are these Voice conference calls or web conference calls? (I ask because this determines where the Audio mixing is done - in your 3CX or on the conf Servers of 3CX).

    Also you should consider/answer the question of IoannisM as this is relevant to distinguish between error of the Jabra oder the Internet link.

    With Kind regards,

    John
     
  6. techdummy

    techdummy New Member

    Joined:
    Sep 22, 2017
    Messages:
    171
    Likes Received:
    9
    Thank you for the replies @IoannisM_3CX and @John Ranger
    Since I'm administering everything from remote location. It takes a little bit time if I want to check the hardware being used.
    I had a check on it with our VMware admin and a staff from the remote location, and it seems like the issue wasnt related to 3cx. Jabra is faulty but the main issue is that they haven't selected the right audio device while configuring 3CX client.
     
  7. techdummy

    techdummy New Member

    Joined:
    Sep 22, 2017
    Messages:
    171
    Likes Received:
    9
    These are video conferencing calls, so the audio was being picked by the webcam it seems.
     
  8. YiannisH_3CX

    YiannisH_3CX Support Team
    Staff Member 3CX Support

    Joined:
    May 10, 2016
    Messages:
    5,425
    Likes Received:
    352
    Glad to hear you found the issue and thank you for updating the post
     
Thread Status:
Not open for further replies.