Callback on Unsuccessful Transfer

Discussion in '3CX Phone System - General' started by Futureweb, Nov 10, 2015.

Thread Status:
Not open for further replies.
  1. Futureweb

    Futureweb New Member

    Joined:
    Jun 29, 2015
    Messages:
    162
    Likes Received:
    10
    Hi,
    is there anything special that I need to configure on Yealink Phones (T48G) to get this working?

    Right now my Yealink Transfer Settings are:
    - transfer.semi_attend_tran_enable = 0
    - transfer.blind_tran_on_hook_enable = 1
    - transfer.on_hook_trans_enable = 1
    - transfer.dsskey_deal_type = 1
    - transfer.multi_call_trans_enable = 1
    - transfer.tran_others_after_conf_enable = 0

    On 3CX the Feature is configured with Function-Code *7* and 20 Seconds.
    Redirect Rules for those Extensions are set to 30 Seconds.

    It's working when I do an internal Call - it's coming back after 20 Seconds.
    But if I transfer an external call it will always do what the Redirect Rules say (after 30 Seconds) - and never bounce back to the extension that initiated the transfer?

    Hope someone can help me on this?
    Andreas Schnederle-Wagner
     
  2. Futureweb

    Futureweb New Member

    Joined:
    Jun 29, 2015
    Messages:
    162
    Likes Received:
    10
    Anyone?
    This Project should be finished by tomorrow and this Problem is driving me nuts! :-(

    Andreas
     
Thread Status:
Not open for further replies.